10. Adjust pedestal feet
Locate the 1/4"
11. Securely tighten jam nuts
When the washer/dryer is level, use a 9/16"
IMPORTANT: The jam nuts must be tightened to avoid vibration.
12. Install pedestal front panel
36" (914 mm) tall models, place wide edge of front panel on bottom
38" (965 mm) tall models, place wide edge of front panel on top
Align the front panel with the pedestal and snap in place.
NOTE: Follow the “Showroom Display Kit Installation Instructions” if you wish to use the two retainer clips included in the parts bag. Discard the retainer clips if not used.
6