Whirlpool REC3622B warranty Using the Automatic Perm PresJReg. cycle, Using the Timed Drying cycle

Page 8

Using the Automatic Perm.

PresJReg. cycle

Use the Penn. Press/Peg. cycle to dry permanent press and some synthetic fabrfcs. Your dryer senses the dryness of the load and automatically shuts off when the selected dryness is reached. For the first few loads:

1.Set the Cycle Control Knob to point to the asterisk (*) in your Perm. Press/Peg.

cY&.

2.Feel the dried items when the dryer stops.

If the load is drier than you like, select LESS dry, or a setting closer to LESS dry, the next time you dry a similar load.

If the load is not as dry as you like, complete drying using the Timed Drying cycle. Select MORE dry, or a setting closer to MORE dry, the next time you dry a similar load.

The Cyde Control Knob will not move until the load is almost dfy or cool-down is reached. After cooldown is complete, the Cycle Control Knob automatically moves to an OFF area and tumbling stops.

Using the Timed Drying cycle

Use the Timed Drying cycle to complete drying if some items are damp after Penn. PressIFleg. cycle drying. Timed Drying is also useful to dry delicate items that require a short drying time, or large bulky items.

1.Turn the Cycle Control Knob to the number of minutes you want in the Timed Drying cycle.

2.For a damp dry, turn the Cycle Control Knob

to 30 minutes or less.

The last few minutes of this cycle are without heat to help make the load easier to handle.

Image 8
Contents UseAndCare Your safety is important to us Thank you for buying a Rope@ applianceUnderstanding Safety What to do if YOU Smell GASImportant SAFEnr Instructions Understanding your responsibilitiesOptional deflector kit KnowingYour Dryer’s FeaturesOptional mounting kits End of cycle signal Operating Your DryerBefore starting your dryer Starting or stopping your dryerUsing the Air cycle no heat Selecting a cycleUsing the Automatic Perm PresJReg. cycle Using the Timed Drying cycleSelecting the right cycle and setting Maintenance-every load Maintenance-as neededCleaning the lint screen Cleaning a clogged lint screenRemoving accumulated lint Cleaning the dryer interiorCleaning the dryer exterior Laundry Before you dryDrying tips SortingDrying special-care items Diapers, baby clothes Elastic items Using dryer fabric softeners Saving energyVacation care Voltage requirementsCAUSES/SOLUTIONS Solving laundering problemsProblem Check if Problem Before calling for assistance If You Need Assistance Or ServiceProblem Check the Following Tf you need service Tf you are not satisfied with how the problem was solvedIf you need assistance If you need FSP replace- ment partsDryer Warranty Length of Warranty What WE will PAY for Full ONE-Y EARWarranty What WE will not PAY for