Technics SC-EH760, SC-EH560 Changing sound field, »quality, Using the manual equalizer

		A Changing sound field and
		»quality
		Changes to sound field and quality have no effect on recordings.
SC-EH760	MULTI JOG	[SC-EH760]
		Turn [MULTI JOG] to select a setting.
		[SC-EH560]
		Press [EQ] to select a setting.

SC-EH560

2 1 3

EQ

Each time you turn [MULTI JOG] (SC-EH760) or press [EQ] (SC-EH560):

HEAVY: Adds punch to rock.

CLEAR:	Clarifies higher sounds.
HALL:	Expands sound to make you feel like you were in a hall.
AI-EQ:	Adjust sound with the acoustic image equalizer
	(➡ page 21).
M.EQ:	Create your own effects (➡ see below).
FLAT:	Canceled (no effect is added).

sound field and quality

		2	1 3		On the remote control
A					Press [EQ].
	SC-EH760 SC-EH560	(On the tuner amplifier)			Note
	MULTI JOG				Turn off the effect if sound quality reduces when using HALL or 3D AI
					EQ with a source.
		(On the sound processor)
	EQ
		SC-EH760		SC-EH560
					B	Using the manual equalizer
				FLAT	»
		FLAT	HALL	HEAVY	Create your own sound quality effects.
				CLEAR
		HEAVY	AI-EQ	HALL	1
		CLEAR	M.EQ	AI-EQ
				M.EQ		[SC-EH760]
B						Turn [MULTI JOG] to select “M.EQ”.
						[SC-EH560]
1
	MULTI JOG					Press [EQ] to select “M.EQ”.

Changing

(On the sound processor)

EQ
FLAT	HALL
HEAVY	AI-EQ
CLEAR	M.EQ

2	3D AI EQ/
	M.EQ BAND	(On the tuner amplifier)
3	2	MULTI
	MULTI JOG	CONTROL

2 Press [3D AI EQ/M.EQ BAND] to se- lect the band.

Each time you press the button:

LOW>MID>HIGH ^------------------------}

3 Use [", !, #, $] to make the re- quired curve.

1Select the frequency you want to use as the peak with [",

!].

2 Adjust the level of the peak with [#, $].

³Adjacent frequencies are adjusted at the same time to

maintain a smooth curve.

11

2

1

FLAT

HEAVY

CLEAR

(On the sound processor)

MID

HALL

AI-EQ

M.EQ

³When you have adjusted the curve, you can move the

peak of the curve by pressing [", !] (a).

Repeat steps 2 and 3 to adjust the three bands.

The original display is restored on the display panel in about 5 seconds.

To cancel

LOWHIGH

2	FLAT	HALL
	HEAVY	AI-EQ
	CLEAR	M.EQ
a
	FLAT	HALL
	HEAVY	AI-EQ
	CLEAR	M.EQ

Turn [MULTI JOG] (SC-EH760) or press [EQ] (SC-EH560) to select “FLAT”.

Note

³The changes you make are stored and automatically recalled the next time you select “M.EQ”.

³After making a curve in one band, any adjustments in another band make a curve that is a combination of the two.

[C]To flatten the curves in all three bands

Set the frequencies b in LOW, c in MID, and d in HIGH to flat.

C

FLAT				HALL
HEAVY	b	c	d	AI-EQ
CLEAR				M.EQ

RQT5355