Bezel Installation
1. Detach the bezel gently from the external storage system.
2.Replace the bezel and attach to the external storage system according to the 4 pin on the angle of bezel.
3 Connecting the Drive
Connecting the Cable
1.Connect the AC adapter cord to the DC power supply socket on the back of the drive.
2.Connect one end of the power cord to the AC adapter.
3.Connect the other end of the power cord to an electric outlet.
4.Connect one end of the USB 2.0 cable to the USB 2.0 port on the back of the device.
5.Connect the other end of the USB 2.0 cable to an available USB port on your computer.
Attention: Eagle Tech Computers, Inc. is not responsible for consequential damages, including loss or recovery of data from your hard drive. Please make sure your power adapter and power cable are properly connected to prevent damage to device.
10 11