Installation, Dryer Description | Hotpoint TVFM 70, TVYM 650

Installation

WHERE TO PUT YOUR DRYER

		If you are going to install the appliance
	m	under a work counter be sure to leave
	m	a 10mm space between the top and any
	10	a 10mm space between the top and any
	10	other objects on or above the machine
		other objects on or above the machine
		and a 15mm space between the sides
		and any kitchen units or walls to ensure
	15 mm	proper air circulation.
	15 mm	15 mm

The dryer must never be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the dryer door.

VENTILATION

When the dryer is in use there has to be adequate ventilation to avoid the back flow of gases into the room from appliances burning other fuels, including open fires.

The vent tube should not exceed 2.4 metres in length.

The tube should be kept clear of the air intake vent and kinks or ‘U’ bends must be avoided as these will obstruct the tube and trap condensation.

VENTING

Air intake vent

Do not block or obstruct

Open window venting

The end of the tube should be directed downwards, to prevent warm moist air from condensing in the room or dryer.

!Do not discharge exhaust air into a flue which is used for exhaust fumes from other appliances that burn gas or other fuels.

Do not discharge exhaust air into an extraction system or any duct with an extractor fan. This will affect the way the thermal controls operate and can result in a fire hazard.

ELECTRICAL CONNECTIONS

The socket must be grounded. The power supply cord should be checked periodically and, if required, replaced by a cord specially prepared for this dryer.

LEVELLING YOUR DRYER

The dryer must be installed level for correct operation. When you have installed your dryer in its final location check that it is first level side to side and then back to front.

If the dryer is not level use a wooden block to support it while adjusting the two front legs up or down until your dryer is level.

Caution: Hot!

Wall mounting

Window mounting

Vent Tube fitted here

Keep the tube as short and as straight as possible to prevent condensation forming in the vent pipe.

The duct in the wall should slope slightly downwards.

BEFORE YOU START USING YOUR DRYER

Once you have installed your dryer and before you use it clean the inside of the drum to remove any dust that could have accumulated during transport.

Dryer Description

Control panel

The hole in the window should be as low down as possible and the tube should be kept as short as possible.

Depending on how often you use your tumble dryer, it is essential that areas A and B are checked periodically to remove lint or debris.

TIMER
Knob	Indicator
	0
			20
			30
			40
130			50
120			60
110	100	80	70


HEAT		START
Button		Button

The HEAT button selects drying temperature.

OUT: LOW heat IN: HIGH heat

TVEM 70, TVFM 70, TVYM 650, TVM 570 specifications

Hotpoint, a brand synonymous with quality home appliances, has produced a range of innovative washing machines designed to cater to various laundry needs. Among its advanced models are the TVYM 650, TVFM 70, TVM 570, and TVEM 70. Each of these machines boasts distinctive features, technologies, and characteristics that set them apart in the competitive appliance market.

The Hotpoint TVYM 650 is known for its impressive capacity and rapid washing cycles. It comes equipped with a sizable drum that can accommodate large laundry loads, making it ideal for families. Its Energy-efficient motor and multiple wash programs allow users to customize their laundry experience based on fabric type and soiling levels. The model also features Hotpoint's innovative Anti-Stain technology, which targets common stains like grass, chocolate, and ink, ensuring they are effectively removed, while preserving the integrity of the fabric.

Next, the Hotpoint TVFM 70 is designed for those who appreciate efficiency without compromising on performance. This model stands out with its front-loading design, which minimizes water consumption while maximizing energy savings. The TVFM 70 incorporates an advanced spin system that provides excellent water extraction, significantly reducing drying time. Additionally, it features a range of quick wash programs, perfect for busy households needing clean clothes in a hurry.

The Hotpoint TVM 570 integrates cutting-edge technology with user-friendly features. This model is equipped with Smart Technology that connects to a mobile app, allowing users to monitor and control the washing process remotely. The TVM 570 also utilizes a unique Anti-Allergy cycle that effectively eliminates allergens, making it an excellent choice for individuals with sensitive skin. Its adjustable spin speed and temperature settings ensure that every wash is tailored to specific laundry needs.

Finally, the Hotpoint TVEM 70 offers versatility and exceptional performance. This model is specifically designed for delicate fabrics, featuring a Woolmark-approved wash cycle that cares for wool garments while maintaining their shape and softness. The TVEM 70 also includes a timer delay function, enabling users to schedule washes at their convenience, which is perfect for energy management.

In conclusion, the Hotpoint TVYM 650, TVFM 70, TVM 570, and TVEM 70 demonstrate the brand's commitment to innovation and quality. Each model is equipped with unique features and technologies that cater to various laundry needs, making them excellent choices for consumers seeking reliability and efficiency in their washing machines. With options that prioritize stain removal, energy savings, and gentle fabric care, Hotpoint continues to be a leader in the home appliance sector.