3.Perform the following steps to remove the camera:
a.Disconnect the camera cable from the assembly. [1]
b.Remove the screws that secure the camera to the display panel. [2]
c.Lift and remove the camera from the computer. [3]
Figure 37.
Installing the Camera
1.Place and align the camera into its position on the display panel.
2.Install the screws that secure the camera to the display panel.
3.Connect the camera cable connector to the camera board.
4.Install:
a.display panel
b.battery
5.Follow the procedures in After Working Inside Your Computer.
Removing the Touch Screen Controller Board
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.battery
b.display
52
