Option | Description | |
|
|
|
| • | Control WLAN Radio |
| • | Control WWAN Radio |
| • Control WLAN radio or Control WWAN radio is not selected (default) | |
Wake on LAN/WLAN | Allows you to enable or disable the feature that powers on the computer | |
| from the Off state when triggered by a LAN signal. | |
| • Disabled: This option is enabled by default | |
| • | LAN Only |
| • | WLAN Only |
| • | LAN or WLAN |
| • LAN with PXE Boot | |
Block Sleep | This option lets you block entering to sleep (S3 state) in Operating | |
| System environment. | |
| Block Sleep (S3 state) - This option is disabled by default. | |
Peak Shift | This option enables you to minimize the AC power consumption during | |
| the peak power times of day. After you enable this option, your system | |
| runs only in battery even if the AC is attached. | |
Advanced Battery Charge | This option enables you to maximize the battery health. By enabling this | |
Configuration | option, your system uses the standard charging algorithm and other | |
| techniques, during the | |
| Disabled (default) | |
Primary Battery Charge Configuration
Battery Slice Charge Configuration
Allows you to select the charging mode for the battery. The options are:
•Adaptive
•Standard
•ExpressCharge: This option is enabled by default.
•Primarily AC use
•Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the Advanced Battery Charge Configuration option.
Allows you to select the type of charge for the battery. The options are:
•Standard Charge
•Express Charge : This option is enabled by default.
NOTE: Express charge may not be available for all the batteries. To enable this option, disable the Advanced Battery Charge Configuration option.
62
