3.Perform the following steps to remove the fingerprint reader:
a.Remove the screws that secure the fingerprint reader cover. [1]
b.Lift the cover and remove it to expose the fingerprint reader board underneath. [2]
c.Disconnect the fingerprint reader cable by lifting the release tab upwards. [3,4]
d.Lift and remove the fingerprint reader board from the computer. [5]
Figure 14.
Installing the Fingerprint Reader
1.Align the fingerprint reader board into its position on the computer and install the fingerprint reader board connector.
2.Place the metal cover on top of the fingerprint reader board and install the screws that secure it.
3.Install:
a.ExpressCard
b.bottom cover
c.hard drive
d.battery
4.Follow the procedures in After Working Inside Your Computer.
Removing the SIM Board
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.battery
b.bottom cover
28
