Dell P45G owner manual Opening the Press-Latch Doors, Installing a QD Quick Disconnect connector

3

Removing and Installing Components

This section provides detailed information on how to remove or install the components from your computer.

Opening the Press-Latch Doors

There are eight press-latch doors. Four on the back, two on the right side, and two on the left side of the computer.

1.Left and right side press-latch doors: Slide the latch towards the back of the computer to lock and towards the front to unlock.

2.Back press-latch door: Slide the latch to the right to lock and to the left to unlock.

3.The door can now be opened by pressing down on the latch and pulling the door in a direction away from the computer.

Installing a QD (Quick Disconnect) connector

1.Perform the following steps to install a QD connector:

a.Align the QD connector to the receptacle on the corner of the computer.

b.Press and hold the button on top of the QD connector.

2.Insert the connector into the receptacle while holding the button pressed.

3.Release the button after the connector is seated in the receptacle to secure it.

11