Topcom Butler 2950

5.8 PAGING

When you press the Paging button on the base unit, the handset emits a ringing signal for 20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing on a handset.

5.9 OUT OF RANGE WARNING

When the handset is out of the working range of the base unit during a conversation, the unit will emit a warning signal to warn the user that he has to move closer towards the base unit.

5.10 FLASH BUTTON (R)

When you press the R button, also called flash or recall, the unit generates a line interruption (of 100 ms or 250 ms). It gives you the possibility to use the special services of your telephone provider and/or to transfer calls when you have a telephone exchange.

5.10.1 Setting the Flash time

Press and hold the redial button for 3 sec.

The display will show: ‘S’ for 100ms or ‘L’ for 250ms

The flash time setting will disappear after 2 sec. from the display

5.11 SETTING THE RING VOLUME AND MELODY

5.11.1 Handset melody

Press and hold the melody button until the current melody is heard.

Select the desired melody (1-9) by means of the scroll keys or by entering a number (1 - 9).

Press again to confirm the setting

5.11.2 Handset ring volume

Press the volume button in standby

The handset will ring in the current volume

Press 1-5 or use the scroll keys to select the desired volume

Press ’0’ to turn the volume OFF

5.11.3 Setting the ring volume level of the base

You can change the ring volume and melody of the Butler 2950 base.

When base is ringing

Press volume key on base to increase or decrease ring volume

Remark:

-You can turn the ringer volume of each individual handset ON or OFF by simply press and hold the key in standby.

5.12 KEY LOCK

When the keypad is locked, pressing any key will have no effect during standby (except holding the key).

Press and hold the key

appears on the display and the keypad is locked

Press and hold the key again to un-lock the keypad

When there is an incoming call, you can still answer the call by pressing the Line button . During the call, the keypad functions as normal. When the call is ended, the keypad will be locked again

5.13 SETTING THE DIALLING MODE

There are two types of dialling mode:

DTMF/Tone dialling (the most common) (default)

Pulse dialling (for older installations)

To change the mode of dialling:

Press and hold the flash R button to toggle between dialling modes: ‘P’ will appear when set to pulse or ‘T’ when set to tone (DTMF) dialling

After 5 sec. the unit returns to standby

68

Topcom Butler 2950

Page 68
Image 68
Topcom 2950 user manual Paging, OUT of Range Warning, Flash Button R, Setting the Ring Volume and Melody, KEY Lock