GB
The Display
Programme progress
The second line of the display shows the status of the programme as it progresses: (long messages scroll across the line)
DRY
COOL TUMBLE
END OF CYCLE, CREASE CARE
(if option Post Care selected).
END OF CYCLE, CLEAN FILTER AND EMPTY WATER BOTTLE
Timed drying 
After selecting a programme that has a Timed Dry option, press the 
Timed button and the display will increment the selected time, each time you press and release the button (see Start and Programmes).
Each press reduces the time duration and number of available time options depending on the programme/material selected.
The Timed Dry icon 
is displayed next to the time.
The selected time remains displayed after the programme starts, but can be changed anytime you wish.
Delay and Time to End
Some programmes can have a delayed start (see Start and Programmes). Press the 
Delay button and the icon flashes.
Each press of the Delay button 
advances the delay setting in 1 hour increments, from: 1h to 24h , then OFF and
then after a couple of seconds cancels the delay.
The delay time is shown on the display next to the Delay button.
The display counts down the minutes of the delay period after
the Start/Pause button 
is pressed.
The second line of the display shows STARTS IN
You can change or cancel the delay time selected anytime if you wish.
After the Start/Pause button is pressed the Delay or Time to End is displayed in hours and minutes and counts down each minute.
Time to End
After the delay period finishes, or for all the programme if delay not selected:
-the estimated time to the end of the programme, for automatic programmes or the actual time remaining during a timed programme is shown in this part of the display.
When timed programmes are selected the time displayed throughout the cycle is the actual time remaining. When Automatic programmes are selected the time displayed is an estimate of the time remaining. When the programme is selected the display shows the time required to dry a full load. The time remaining is constantly monitored during the drying cycle and is updated to show the best forecast.
The colons between the hours and minutes in the display flash to show the time is counting down.
10