Electrolux 76650 A3 user manual Cleaning the water inlet filters

Page 25

Care and cleaning
Care and cleaning	25

When the appliance is in use and depending on the programme selected there can be hot water in the pump.

Never remove the pump cover during a wash cycle, always wait until the appliance has fin- ished the cycle, and is empty. When refitting the pump cover, ensure it is securely re-tight- ened so as to stop leaks and young children being able to remove it.

Cleaning the water inlet filters

If the appliance doesn't fill, it takes a long time to fill with water, the starting button blinks yellow or the display (if available) shows the relevant alarm (see chapter "What to do if..." for more details), check if the water inlet filters are blocked .

To clean the water inlet filters:

1. Turn off the water tap.

2. Unscrew the hose from the tap.

3. Clean the filter in the hose with a stiff brush.

4. Screw the hose back onto the tap. Make sure the connection is tight.

5. Unscrew the hose from the machine. Keep a towel nearby because some water may flow.

6. Clean the filter in the valve with a stiff brush or with the piece of cloth.

Image 25

Contents Washing Machine Lavamat 76650 A3Contents General safety Safety InformationSafety information Positioning and levelling 132940590-A-422010Safety information InstallationUse Product Description Child SafetyKeep all detergents in a safe place out of children’s reach Detergent dispenser drawer Control Panel Table of SymbolsControl panel = Handwash = Rinse Hold = Cold = Child LockDisplay Child safety lock symbolAcoustic signals Indicator pilot lightsChild safety lock First USELoad the laundry Daily USEMeasure out the detergent and the fabric softener Daily useSelect the desired Temperature Button Select the Prewash option Button Programme option buttonsSelect the Stain option Button Select the Time Saving option ButtonDelay Start can not be selected with the draining programme Select the Delay Start ButtonSelect an additional rinse Extra Rinse Select the START/PAUSE ButtonAltering an option or a running programme Cancelling a programmeInterrupting a programme Opening the door after the programme has started40 60 MIX Washing ProgrammesSynthetic fabrics to be gentle washed Washing programmesVet, bedspread and so on Max. load 2 kgHandwash Cold Then select the spinning programme20 MIN. 3 KG Helpful Hints and Tips TemperaturesSorting out the laundry Before loading the laundryFollowing weights are indicative Laundry weightsMaximum loads Removing stainsDetergents and additives Care and CleaningDegrees of water hardness External cleaning Maintenance washCare and cleaning DescalingDoor seal Washing drumDrain pump Refit the flap and close the pump door Cleaning the water inlet filters What to do IF… Frost precautionsEmergency emptying out Washing machine does not start What to do if…Machine does not fill There is water on the floor SpinUnsatisfactory washing results Door will not openNo water is visible in the drum Machine vibrates or is noisyTechnical data Technical DataConsumption Values Trol panelUnpacking InstallationRear of the appliance Slide out the relevant plastic spacers InstallationWater inlet Positioning and levellingPage Water drainage Water-stop deviceEnd of the drain hose can be positioned in three ways Environment Concerns Electrical ConnectionEcological hints Packaging materialsPage Page 132940590-A-422010