What to do if… 27
During machine operation it is possible that the yellow pilot light of button 8 blinks, one of the following alarm codes appears on the display and at the same time some acoustic sig- nals sound every 20 seconds to indicate that the machine is not working:
•
: problem with the water supply
•
: problem with the water draining
•
: door open
•
:
Once the problem has been eliminated, press the button 8 to restart the programme. If af- ter all checks, the problem persists, contact your local Service Centre.
Problem |
|
| Possible cause/Solution |
|
|
| |
|
| The door has not been closed. | |
|
| • Close the door firmly. | |
|
| The plug is not properly inserted in the power | |
|
| socket. | |
|
| • | Insert the plug into the power socket. |
|
| There is no power at the socket. | |
|
| • Please check your domestic electrical instal- | |
|
|
| lation. |
The washing machine does not start: |
| The main fuse in your house has blown. | |
| • | Replace the fuse. | |
|
| The selector dial is not correctly positioned and | |
|
| the button 8 has not been pressed. | |
|
| • Please turn the selector dial and press the | |
|
|
| button 8 again. |
|
| The delay start has been selected. | |
|
| • | If the laundry is to be washed immediately, |
|
|
| cancel the delay start. |
|
| The Child safety lock has been activated. | |
|
| • | Deactivate this device. |
|
|
| |
|
| The water tap is closed. | |
|
| • | Open the water tap. |
|
| The inlet hose is squashed or kinked. | |
|
| • | Check the inlet hose connection. |
The machine does not fill: |
| The filter in the inlet hose or the inlet valve fil- | |
| ter are blocked. | ||
|
| ||
|
| • Clean the water inlet filters (see "Cleaning | |
|
|
| the water inlet filters" for more details). |
|
| The door is not properly closed. | |
|
| • Close the door firmly. | |
|
|
| |
The machine fills then empties immediately: |
| The end of the drain hose is too low. | |
| • | Refer to relevant paragraph in «Water drain- | |
|
|
| age» section. |
|
|
|
|