8. BLANKET PROGRAM
Put the laundry into the Drum and put the detergent and softerner into the detergent case.
Then close the Door.
1• Put the detergent into the main wash room(I I marking) in the detergent case.
•Softener should be below 'MAX' level.
•When you want to use bleach, put it into the main wash room (I I marking) with detergent.
2 | Press the Power button. | |
• The LED shows only '- | ||
|
Select the 'BLANKET' program using the program selection dial.
•If you press 'Start/Pause' button aftrer pressing Power button without selecting program, the 'NORMAL' program is selected as default program.
3• 'Main wash' and '3' times rinse and '800' rpm spin speed and 'Cold' water temperature are selected automatically.
•If you want to change the 'Washing course' and 'Rinse time(s)' and 'Spin speed', select program what you want to change by pressing each button.
4 | Press the 'Start/Pause' button. | |
• The washer will be operated with locking Door and supplying water. | ||
|
Note
•If you want to change the setting program during operation, press the 'Start/Pause' button to hold the operation and change the program you want to change by pressing each corresponding button.
•Water temperature 'Cold' is only selected in order to prevent delicate clothes from damaging.
•Spin speed '400' and '600' and '800' are only selectable.
•DRY function is not selected(option function).
•DELAY START is not selected.
•SOAK and Pre Wash in wash program are not selected.
•If you want to add the clothes during operation, press 'Start/Pause' button and 'Door unlock' button, then open the Door and put the clothes into the Drum and then close Door and press 'Start/Pause' button again.
18