10. MEMORY PROGRAM
Put the laundry into the Drum and put the detergent and softerner into the detergent case.
Then close the Door.
•Put the detergent into the main wash room(I I marking) and prewash room(I marking)
1in the detergent case.
•Softener should be below 'MAX' level.
•Put the detergent into the pre wash room(I marking) only if you want to add prewash.
•When you want to use bleach, put it into the main wash room (I I marking) with detergent.
2Press the Power button.
•The LED shows only '-
Select the 'MEMORY' program using the program selection dial.
•If you press 'Start/Pause' button aftrer pressing Power button without selecting program, the 'NORMAL' program is selected as default program.
3• If you want to memorize the 'Washing program' and 'Washing course' and 'Rinse time(s)' and 'Spin speed' and 'water temperature' (and 'Dry condition'), select somethings what you want to change by pressing each button and using the program selection dial.
4 | Press the 'Start/Pause' button. | |
• The washer will be operated with locking Door and supplying water. | ||
|
Note
•If you start memorized program, this data will be saved automatically.
•If you want to change the setting program during operation, press the 'Start/Pause' button to hold the operation and change the program you want to change by pressing each corresponding button.
•If you want to add the clothes during operation, press 'Start/Pause' button and 'Door unlock' button, then open the Door and put the clothes into the Drum and then close Door and press 'Start/Pause' button again.
20