52 something not working
Malfunction
Possible cause |
| Solution |
|
|
|
The machine vibrates or is noisy:
Spinning starts late or the machine does not spin:
The machine makes an unusual noise
No water is visible in the drum
●The transit bolts and packing have not been removed.
●The support feet have not been adjusted.
●The laundry is not evenly distributed in the drum.
●Maybe there is very little laundry in the drum.
●The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after 10 minutes, the laundry is still not evenly distributed in the drum, the machine will not spin. In this case, redistribute the load manually and select the spin programme.
●The machine is fitted with a type of motor which makes an unusual noise compared with other traditional motors. This new motor ensures a softer start and more even distribution of the laundry in the drum when spinning, as well as increased stability of the machine.
●Machines based on modern technology operate very economically using very little water without affecting performance.
●Check the correct installation of the appliance.
●Check the correct levelling of the appliance.
●Redistribute the laundry.
●Load more laundry.
●Redistribute the laundry.