Electrolux FJD 1466 W Select the temperature, Select the desired options, Select the Delay Start

Page 11

6. Select the temperature

Press the TEMPERATURE button if you wish to select a temperature value different from the one proposed by the washing machine.

The relevant light will light up.

90°C

60°C

50°C

40°C

30°C

T

 

R

E

E

T

 

M

 

 

P ERA

U

 

 

 

 

7.Select the spin speed or the NIGHT WASH option

Press the SPIN SPEED button repeatedly, in order to select the desired spin speed or the NIGHT WASH option. The relevant light will light up.

If you select the NIGHT WASH option, the machine will stop at the end of the programme with the water still in the tub.

1400

1200

900

700

NIGHT

WASH

P

 

 

ED

S

I

E

 

 

N SP

 

8. Select the desired options

If your laundry is very dirty, it may be advisable to select the PREWASH option.

If you wish the laundry to undergo a soak, select the OUTDOOR SPORTS option.

If your laundry is only slightly soiled, select the QUICK option.

PREWASH

 

OUTDOOR

 

SPORTS

 

QUICK

W

 

E

 

IC

A

 

S

O

 

H CH

 

9.Select the SUPER RINSE or AA40° option

If you wish the laundry to undergo an extra rinse, select the SUPER RINSE option.

If your laundry is lightly or normally soiled and it is necessary to prolong the washing time, select the AA40° option.

The relevant light illuminates.

 

SUPER

 

RINSE

 

AA40°

O

S

 

PTION

10. Select the DELAY START

Before you start the programme, if you wish the starting to be delayed, press the DELAY START button repeatedly, or keep it pressed, to select the desired delay. The selected delay time value (up to 24 hours) will appear on the display for 3 seconds, then the duration of the programme will appear again.

If the OUTDOOR SPORTS option has been choosen, the selected delay will correspond to the soak time. In this case the display will show after 3 seconds the entire programme duration (including the soak phase).

DELAY

START

11. Start the programme

Press the START/PAUSE button. The relevant light will stop flashing, the DOOR LOCKED light will light up, and only the light relevant to the phase that is in progress will remain lit.

If you have chosen a delayed start, the washing machine will begin the countdown.

The display will show the duration of the programme or the selected delay.

11

Image 11
Contents Washing Machine Use InstallationChild Safety Contents Interest of the environment Your New Washing MachineEcological hints Detergent dispenser drawer Child safety featureDescription of the Appliance Door locked lightControl Panel Drain only Wash Choice buttonOptions button DisplaySelecting a special programme SKIP/RESET buttonSTART/PAUSE button Programme phase indicator lights Delay buttonOperating Sequence Select the Super Rinse or AA40 option Select the temperatureSelect the Delay Start Select the desired optionsEnd of programme How to change a programme during its cycle1000g = 1 kg «JETSYSTEM» washWhich form? Which detergent?Important Notes Wash Care SymbolsWashing programmes Maintenance and Cleaning Water inlet filter Clean carefully under a fast running tapSomething Not Working Customer Care Service & Spare PartsSymptom Possible causes 0870 5This guarantee does not cover Zanussi Guarantee ConditionsStandard guarantee conditions European guaranteeTechnical Specifications Installation InstructionsPositioning Installation on a Suspended FloorUnpacking Appliance must be connected to a cold water supply Water inletWater drainage Special conditions LevellingPermanent connection Electrical connectionFrom the Electrolux Group. The world’s No choice