GM JDP40 manual Using the clock and timer, Care

Using the clock and timer.

Safety

Not all features are on all models.

To Set the Clock

The clock must be set for the automatic oven timing functions to work properly. The time of day cannot be changed during a timed baking or self-cleaning cycle.

Make sure the clock is set to the correct time of day.

Press the CLOCK pad.

Press the INCREASE or DECREASE pad to set the time of day.

Press the CLEAR/OFF pad to start, or the clock will automatically start after 6 seconds.

Instructions

KITCHEN

TIMER

ON OFF

The kitchen timer is a minute timer only.

The kitchen timer does not control oven operations. The maximum setting on the kitchen timer is 9 hours and 55 minutes.

To Set the Kitchen Timer

Press the KITCHEN TIMER ON/OFF pad.

Press the INCREASE or DECREASE pad to set the amount of time on timer.

The kitchen timer will start automatically within a few seconds of releasing the pad.

The kitchen timer, as you are setting it, will display 5- second increments until 2 minutes is reached.

It will display 10-second increments until 10 minutes is reached.

It will display 1-minute increments until 1 hour is reached.

After 1 hour, it will display 5-minute increments until the maximum time of 9 hours and 55 minutes is reached.

Care and

To Reset the Kitchen Timer

If “TIMER” is displayed, press the INCREASE or DECREASE pad until the desired time is reached.

If “TIMER” is not displayed, press the KITCHEN TIMER ON/OFF pad first, then follow the instructions above to set the kitchen timer.

To Cancel the Kitchen Timer

Press the KITCHEN TIMER ON/OFF pad until the word “TIMER” disappears from the display.

End of Cycle Tones

The end of cycle tone is a series of 3 beeps followed by 1 beep every 10 seconds for 5 minutes (or until the KITCHEN TIMER ON/OFF pad is pressed).

Installation

CleaningTroubleshooting Tips

Instructions

13

Customer Service