GM JDP40 Install the End Cap Filler Blocks optional, Install the Lower Filler Trim Panel optional

Safety Instructions

Operating	Instructions
Care and Cleaning
Installation	Instructions

Installation Instructions.

Read these instructions completely and carefully.

Install the End Cap Filler Blocks (optional)

On existing installations that used a GE family drop-in range cutout, there may be a gap on each side of the range once it is installed. To make sure the gaps are filled, install the filler blocks.

Remove the adhesive backing from the filler blocks and press them into place on both sides, with the open side toward the range.

Countertop Edge

Insert Filler

Block on Each

Side

Install the Lower Filler Trim Panel (optional)

On existing installations that used a GE family drop-in range cutout, there may be a gap between the range bottom after it is installed and the lower toe kick area.

TipsTroubleshooting ServiceCustomer 24

Lower Filler

Trim Panel

Toe Kick Area

To make sure this gap is filled, attach the lower filler trim panel to the top of the toe kick panel, using the two screws provided.