Use 15
Select the required programme
You can choose the right programme for any type of laundry following the descriptions on the washing programme tables (see Washing Programmes).
Turn the programme selector dial to the required programme. The programme selector determines the type of washing cycle (e.g. water level, drum movement, number of rinses) and the washing temperature according to the type of laundry.
The Start/Pause light starts to flash and the Display shows the duration of the selected programme.
The selector dial can be turned either clockwise or anticlockwise. Position O (Aus/Arrêt) to Reset programme/Switch OFF the machine.
At the end of the programme the selector dial must be turned to position O (Aus/Arrêt), to switch the machine off.
Attention!
If you turn the programme selector dial to another programme when the machine is working, the Yellow Start/Pause pilot light will flash 3 times and the message Err is displayed to indicate a wrong selection. The machine will not perform the new selected programme.
Select the spin speed or the rinse hold option
Press the Spin button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up. The maximum spin speed is 1400 rpm.
For the maximum spin speed forseen for each programme consult the chapter «Washing programmes».
Rinse Hold
To empty the water out:
●turn the programme selector dial to O (Aus/Arrêt)
●select the Drain or Spin programme
●reduce the spin speed if needed, by means of the relevant button
●depress Start/Pause button
●when the programme has finished the display shows a 0 flashing. The pilot light Door goes off and the door can be opened.