Electrolux WA GLE S7000 user manual HEC0003 HEC0023 C

42Installation

4.Unscrew and remove the two large rear bolts B and the six smaller bolts C.

5.Remove the bracket D and tighten up the six smaller bolts C. Slide out the relevant plastic spacer E.

			C
	C	D	B
HEC0003		B
		E
			C
HEC0023 C

6.Open the porthole, take out the inlet hose from the drum and remove the polystyrene block fitted with the adhesive tape on the door seal.

7.Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet.

8.Connect the water inlet hose as described under the paragraph «Water inlet».

All the different plug caps are supplied with the appliance in the plastic bag containing the instruction booklet.

HEC0010

HEC0005