Electrolux W 1250 manual Are supplied with it, Cover the hole with the cap C

Page 38

Installation and connection instructions

3	The special spanner (A) and the
	caps (B) (2 each) and (C) (1 each)

are supplied with it.

3.Remove the screw D, including the compression spring with the special spanner A.

4.Cover the hole with the cap C.

Important! When fitting the plastic caps, press until they snap into the rear panel securely.

5.Remove the two screws (E) with the special spanner (A).

6.Remove the 4 screws (F).

7.Remove the transit bar (G).

8.Screw the 4 screws (F) back in for safe keeping.

9.Close the 2 large holes with the caps (B).

Important! When fitting the plastic caps, press until they snap into the rear panel securely.

Image 38

Contents Lavamat W 1250 Electronic Future owners Dear CustomerPages of this instruction book ApplianceContents Trouble Shooting What to do ifPage Intended Use SafetyPrior to initial start-up Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingDrawer for Detergent and Conditioners Description of the ApplianceFront view Control Panel Programme selectorProgramme Option Buttons WOOL/SILK P HandwashLoad Water Energy Time Consumption Values and Programme TimesShortened wash programme for lightly soiled washing Sorting and preparing a wash load Before the First WashPreparing a Wash Load Types of Washing and Care Symbols Water hardness details Quantities of detergent and conditioners?Water softening After the washing programme has ended Running a washing cycleBrief instructions Loading the washing Door indicator START/PAUSE indicatorOpening and closing the door Start the wash programme againDetergents and conditioners If using liquid detergents/tabletsAdding detergent/conditioners Compartment for main wash powder detergentsFor the appropriate pro Setting the washing programmeChanging Spin Speed/selecting Rinse Hold Justed to suit the washing programmeChanging the washing programme Starting the Wash ProgrammeProgramme Progress Washing cycle complete/removing the washing Changing the Spin SpeedProgramme Tables WashingType of washing Separate RinsingSeparate Spinning Maintenance and Cleaning Detergent Dispenser DrawerWashing Machine Drum Maintenance WashTo run a maintenance wash Main doorCleaning the drain pump Before cleaning the drain pumpOperating Instructions What to do if Trouble ShootingProblem Possible cause Remedy Moved START/PAUSE Water tap is not fully Open the water tap fully If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterAdditional rinse cycles RINSE+ When the water is completely drainedTo cancel the additional rinse cycles To set the additional rinse cyclesWashing programme can be Child Safety FeatureCancelling the child safety feature StartedInstallation and connection instructions Installation Safety PrecautionsRemove transport packaging Installation of the applianceTransporting the appliance Are supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceEarth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed Disposed of safelyPermanent Connection Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Great Britain Guarantee ConditionsEuropean Guarantee Page Index PNC Service & Spare Parts0870 5 929 Help us to help you Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG