Electrolux W 1250 manual Water Drainage

Page 45

Installation and connection instructions

Water Drainage

The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece“ supplied. The standpipe should have an internal diameter of approximately 38 mm (see dia- gram) thus ensuring there is an air break between the drain hose and standpipe.

Important! It is essential to lay the drainage hose without kinks.

When discharging into a stand- pipe ensure that the top of the curve in the hose end is no more than 90 cm (35.4’’) and no less than 60 cm (23.6’’) above floor level.

The upright standpipe should have a minimum, length of

30 cm (12’’) from the bottom of the elbow to the top of the pipe (see diagram). Make sure that it is designed in such a way that the end of the drain hose cannot be covered with water.

Longer drain hoses are available in lengths of 2.7 and 4 metres from your AEG Service Force Centre.

45

Image 45

Contents Lavamat W 1250 Electronic Pages of this instruction book Dear CustomerFuture owners ApplianceContents What to do if Trouble ShootingPage Safety Prior to initial start-upIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingDescription of the Appliance Front viewDrawer for Detergent and Conditioners Programme selector Control PanelWOOL/SILK P Handwash Programme Option ButtonsConsumption Values and Programme Times Shortened wash programme for lightly soiled washingLoad Water Energy Time Before the First Wash Preparing a Wash LoadSorting and preparing a wash load Types of Washing and Care Symbols Quantities of detergent and conditioners? Water softeningWater hardness details Running a washing cycle Brief instructionsAfter the washing programme has ended Opening and closing the door Door indicator START/PAUSE indicatorLoading the washing Start the wash programme againAdding detergent/conditioners If using liquid detergents/tabletsDetergents and conditioners Compartment for main wash powder detergentsChanging Spin Speed/selecting Rinse Hold Setting the washing programmeFor the appropriate pro Justed to suit the washing programmeStarting the Wash Programme Programme ProgressChanging the washing programme Changing the Spin Speed Washing cycle complete/removing the washingWashing Programme TablesSeparate Rinsing Separate SpinningType of washing Detergent Dispenser Drawer Maintenance and CleaningTo run a maintenance wash Maintenance WashWashing Machine Drum Main doorBefore cleaning the drain pump Cleaning the drain pumpOperating Instructions Trouble Shooting Problem Possible cause RemedyWhat to do if Moved START/PAUSE Water tap is not fully Open the water tap fully If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingTo cancel the additional rinse cycles When the water is completely drainedAdditional rinse cycles RINSE+ To set the additional rinse cyclesCancelling the child safety feature Child Safety FeatureWashing programme can be StartedInstallation Safety Precautions Installation and connection instructionsInstallation of the appliance Transporting the applianceRemove transport packaging Cover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelMeasures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Disposed of safelyPermanent Connection Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Guarantee Conditions European GuaranteeGreat Britain Page Index 0870 5 929 Help us to help you Service & Spare PartsPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG