Electrolux 51165 manual Changing the spin speed / Selecting the rinse hold function

Operating Instructions

Changing the spin speed / Selecting the rinse hold function

0

3

If required, change the spin speed for the final spin or select o (RINSE HOLD):

Continue to press the Spin Speed/o (RINSE HOLD) button until the desired spin speed (or o/RINSE HOLD) indicator is illuminated.

•If the Ì indicator is illuminated, the final spin cycle will commence with 500 revolutions per minute for the programmes t (COTTONS/ LINEN) and ECO (ENERGY SAVING), and with 450 revolutions per minute for the other programmes.

•If the o(RINSE HOLD) indicator is illuminated, the washing remains in the final rinse water and is not spun.

•If none of the indicators are illuminated, the final rinse will be auto- matically adjusted according to the wash programme:

– t (COTTONS/LINEN)	1100 revolutions per minute
– ECO (ENERGY SAVING)	1100 revolutions per minute
– }(EASY-CARES)	1000 revolutions per minute
– Ã (DELICATES)	1000 revolutions per minute
– s(WOOL)/Ñ (SILK)	1000 revolutions per minute
P(Handwash)

The spin speed for the intermediate spin cycle depends on the selected programme and cannot be changed.

Starting the Wash Programme

01. Check that the water tap is open.

2.To start the wash programme, press the O/s (START/

	PAUSE) button. The wash programme starts.
3	If L (END) flashes 4 times when the O/s (START/
	PAUSE) button is pressed, the door is not closed properly. In this case,

push the door in firmly, and press O/s (START/PAUSE) again.

21