Electrolux 51165 manual Environmental tips

Page 9

Operating Instructions

2Environmental tips

A pre-wash cycle is not necessary in the case of washing which is not excessively dirt. This saves detergent, water and time (and is gentle on the environment.)

If the indicated load capacities are taken full advantage of, the wash- ing machine is especially efficient.

For small loads, use only one half to one third of the recommended detergent quantity.

Suitable pre-treatment enables marks and limited amounts of dirt to be removed. You can then wash at a lower temperature.

Wash slightly to normally dirty cottons with the energy-saving pro- gram.

There is often no need for the softener. Try it once! If you use a drier, your washing will become soft and fluffy even without a softener.

In the case of medium to high water hardness (hardness range runs to upwards, see "Detergent and care agents“), you should use a water softener. The detergent can then always be metered for hardness range I (= soft).

9

Image 9
Contents Lavamat 51165 Electronic Please read this user information carefully Dear CustomerContents What to do if Installation and connection instructionsWarranty conditions / Customer service centres Safety Before Using for the First TimeCorrect Use General Safety Safety of Children and Infirm PersonsDisposal Disposing of the Packaging MaterialDisposing of your old appliance Environmental tips Unit description Front viewDrawer for Detergent and Conditioners Control Panel Programme selectorCOTTONS/LINEN Programme Option Buttons Load Water Energy Time Consumption Values and Programme TimesBefore the First Wash Prepare washing cycleSort washing and prepare Types of Washing and Care Symbols Water softener How much detergent and care agent?Water hardness details Hardness classRunning a washing cycle Brief instructionsAfter the washing programme has ended Opening and closing the door Add the washingSTART/PAUSE Adding detergent/conditioners If using liquid detergents/tabletsOr for water softener Compartment for main wash powder detergentsFor the appropriate pro Setting the washing programmeStarting the Wash Programme Changing the spin speed / Selecting the rinse hold functionChanging the washing programme Programme ProgressWashing cycle complete/removing the washing Washing Programme TablesSeparate Rinsing Separate SpinningType of washing Detergent Drawer Cleaning and CareMain door Washing DrumRemedying Faults Problem Possible cause RemedyWhat to do if Moved Washing has Water tap is not fully Open the water tap fully If there are still grey spots on the washing If the washing results are not satisfactoryIf at the end of the last rinse foam is still visible If there are white remnants on the washingCarrying out emergency drainage Drain pump When the water is completely drainedOperating Instructions To cancel the additional rinse cycles Additional rinse cycles Á+/RINSE+To set the additional rinse cycles Child Safety Feature Cancelling the child safety featureSetting the child safety feature Installation Safety Precautions Installation and connection instructionsInstallation of the appliance Transporting the applianceRemove transport packaging Are supplied with it Prepare the installation place Installation on a concrete baseInstallation on vibrating floors Compensate for floor unevenness Electrical connection Water connectionPermissible water pressure Water inflow Delivery heads over 1m Water drainWater drain-off inside a siphon Water drain-off inside a basinDimensions Technical dataAutres agences étrangères assurant le service après-vente Further after-sales service agencies overseasWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroCroatia New Zealand Australia Korea South NamibiaBulgaria Kuwait/Arabian Gulf Cyprus Lebanon OmanJapan Singapore Slovenia Israel Malaysia Saudi ArabiaThailand Slovakia Rep South Africa HungaryIndex When do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG