Using dryer fabric softeners
Dryer fabric softeners are recommended for reducing static cling and for softening fabrics. Always follow package instructions carefully.
lPut one fabric softener sheet on top of the load before starting the dryer. Do not add a fabric softener sheet after the drying cycle has started. Instant heat can cause the fabric softener to spot fabrics.
l
l
Remove fabric softener stains by wetting the stains and rubbing them with liquid detergent or bar soap and rewash. Some fabric softeners can clog the lint screen and slow drying. Use fabric soften- ers labeled as dryer safe.
Saving | energy |
|
|
|
|
|
|
|
|
| |||
l | Use | an Automatic | cycle to dry most loads. | l Shorten | drying | times | by exhausting | dryer | |||||
l | Dry | only | full loads | without overdrying. | properly | and cleaning | exhaust duct | and | |||||
l Avoid overloading dryer, adding wet items | outside exhaust hood as needed. |
|
| ||||||||||
the | lint | screen | clean. |
|
|
| |||||||
| to a partly dried load, or opening | the door |
|
|
| ||||||||
| unnecessarily. |
|
| dryer in a room where | room air | ||||||||
. Plan | your | laundry | to dry one load after | temperature | is above 45°F | (7°C). |
| ||||||
| another. | A warm | dryer shortens | drying time. | by fabric | weight | and | type. | |||||
Vacation care
1.Unplug power supply cord or turn off electrical power supply.
2.Clean lint screen.
Voltage requirements
l Model LER3622D operates on 240 or 208 volt household current.
l Models LDR3822D and LGR3622D operate on 120 volt household current.
NOTE: Electric dryers using 208 or 120 volts require longer drying times than dryers using 240 volts.
240 or 208 volt power supply
14