Whirlpool LG95OlXT, LG952lXT manual Lint removal, Replace panel reconnect and relevel the dryer

Page 11

Thermostats

 

Heat element

I

Heater_ box

terminals

I

Electric dryer

Igniter L Funnel ~-

Gas dryer

Powdered laundry detergent

Make a paste with detergent and very warm water. Apply paste to a soft cloth and scrub area until all excess dye is removed. Wipe thoroughly with a damp cloth. Tumble a load of rags to dry.

-OR-

Liquid household cleaner

Apply to stained area. Rub with a cloth until all excess dye is removed. Tumble a load of rags to dry.

To clean dryer exterior, wipe with a soft, damp cloth.

Lint removal

Lint can gather inside the dryer and create a FIRE HAZARD. This lint should be removed at least every 2 to 3 years, or more often, depending on dryer usage.

Electric Shock and

Personal Injury Hazard

l Unplug the power supply cord or turn off the electrical Dower.

l Do not put hands inside the cabinet.

l Make sure the dryer is cool.

Failure to do so could result in electrical shock, injury or damage.

Cleaning should be done only by a qualified person.

1.Remove back panel (electric) or lower access panel (gas).

2.Avoid damaging wires, thermostats, funnel or igniter.

3.Remove lint from boxed-in area with a soft brush or vacuum cleaner.

4.Replace panel; reconnect and relevel the dryer.

11

Image 11
Contents LE9500XT LG95OlXT LE9520XT LG952lXT Use&CareGuideContents Instructions ImportantSafetyInstructionsAdditionalsafetyinstructionsandyourresponsibilities Save TheseStartingyourdryer OperatingInstructionsPage Operating Instructions TheautomaticcyclesFold them UsingTUMBLEPRESSUsinaFLUFFAIR Tumble PressLintsignal UsingDAMPDRYEnd-of-cyclesignal GentleHeatsystem FINISHGUARD@setting AdditionalDryerFeaturesCaringForYourDryer Cleaningthe lint screenCleaningthe dryerinterior Replace panel reconnect and relevel the dryer Lint removal2000 M-63 Benton Harbor, Ml IfYouNeedServiceOrAssistanceIf you need service’ Service com If you prefer, write to Mr. Donald SkinnerMacap will in turn inform us of your action If you need FSP’ replacement parts’Page Page Whirlpool will not PAY for Length of WarrantyFrom Date of Purchase Whirlpool will PAY for