Whirlpool LG968lXW manual Lint removal, Caring For Your Dryer

Page 12

Caring For Your Dryer

Continued

Thermostats

 

Heat element

I

Heater box

terminals

.

Electric dryer

Igniter

Gas dryer

Powdered laundry detergent

Make a paste with detergent and very warm water. Apply paste to a soft cloth and scrub area until all excess dye is removed. Wipe thoroughly with a damp cloth. Tumble a load of rags to dry.

-OR-

Liquid household cleaner

Apply to stained area. Rub with a cloth until all excess dye is removed. Tumble a load of rags to dry.

To clean dryer exterior, wipe with a soft, damp cloth.

Lint removal

Lint can gather rnsrde the dryer and create a FIRE HAZARD. This lint should be removed at least every 2 to 3 years, or more often, depending on dryer usage.

Electrical Shock and

Personal Injury Hazard

l Unplug the power supply cord or turn off the electrical power before removing lint.

l Do not put hands inside the cabinet.

l Make sure the dryer is cool.

Failure to do so could result in electrical shock, injury or damage.

Cleaning should be done only by a qualified person.

1.Remove back panel (electric) or lower access panel (gas).

2.Avoid damaging wires, thermostats, funnel or igniter.

3.Remove lint from boxed-in area with a soft brush or vacuum cleaner.

4.Replace panel; reconnect and relevel the dryer.

Image 12
Contents Use&CireGuide Contents ImportantSafetyInstructions AdditionalsafetyinstructionsandyourresponsibilitiesDo not reach into a dryer if the drum is moving OperatingInstructions StartingyourdryerPage Theautomaticcycles Operating InstructionsUsingFLUFFAIR UsingTUMBLEPRESSFold them UsingDAMPDRY End-of-cyclesignalLintsignal AdditionalDlyerFeatures Usingthe dryingrackGentleHeatsystem FINISHGUARDsetting Block to shape and lay flat on RackCotton or polyester fiber filled Cleaningthe lint screen Cleaningthe dryerinteriorCaringForYourDryer Lint removal Caring For Your DryerReplace panel reconnect and relevel the dryer Changingthe dormlight IfYouNeedServiceOrAssistance If you need serviceIf you prefer, write to Mr. Donald Skinner 2000 M-63 Benton Harbor, MlIf you need FSP replacement parts’ Macap will in turn inform us of your actionWhirlpool’AutomaticDryerWarranty From Date of Purchase