Electrolux 62825 manual Starting a programme, Programme sequence

Page 14

PRE WASH

Warm pre-wash before the main wash that follows automatically; with intermediate spin for COTTONS/LINEN and EASY-CARES, without inter- mediate spin for DELICATES.

STAIN

For heavily soiled or stained washing. Stain removal agent will be rinsed into the wash at the optimum point in the programme.

Can only be set for wash temperatures of 40°C and upwards as stain re- movers only become effective at higher temperatures.

Starting a programme

1.Check that the tap is turned on.

2.Press the START/PAUSE button. The programme is started.

3If after pressing the START/PAUSE button E40 flashes in the multi-dis- play, the END indicator flashes 4 times and at the same time an acous- tic signal sounds 4 times, the door has not been correctly shut. Push the door firmly closed and press the START/PAUSE button again.

Programme sequence

The programme progress display shows the programme step that is currently being carried out.

The multi-display shows the estimated time remaining (in minutes) until the end of the programme.

3The time remaining can increase or stay the same for a while during the course of the cycle as the programme adjusts itself to various condi- tions (e.g. type of washing and quantity, out of balance spin detection, special rinse cycle, etc.).

14

Image 14
Contents Lavamat Following symbols are used in the text Dear CustomerContents Installation and connection instructions Safety information concerning installationChild safety SafetyPrior to using the appliance for the first time Follow the Installation and connection instructionsGeneral safety Resulting overheating may constitute a fire hazardDescription of the appliance Control panelProgramme overview RefreshApplication/Features Care Symbols1 Preparing washing Before the first washPreparing and sorting washing Sorting washingAdding detergent/conditioner Running a wash cycleOpening the door/loading washing Open the door pull the handle on the doorWashing powder/tablets for the main wash cycle Switching on the appliance/selecting a programmeIf you are using liquid detergent Shortened wash programme for lightly soiled items Changing the spin speed/selecting rinse holdSelecting additional programmes Starting a programme Programme sequenceInterrupting a programme Interrupting a programme/adding washingEnd of the wash cycle/removing the washing Adding washingChild safety device Deactivating the child safety deviceDetergent dispenser drawer Cleaning and maintenanceCleaning procedure Washing drumWhat to do if Remedying small faults yourselfClean the glass in the door and the rubber collar regularly Door and rubber collarE10 appears Tap is shut off Turn on the tap END indicator is Foam can still be seen following the final rinse If the wash result is not satisfactoryThere are grey stains on the washing There are white residues on the washing When the water has all drained awayCarrying out an emergency drain Drain pump Old appliance DisposalPackaging material Technical data Consumption valuesSafety information concerning installation This washing machine cannot be built-inTransporting the appliance Installing the applianceWhen using a sack trolley to transport the washing machine UnpackingPage Remove the bracket D Refit the six smaller bolts C Where to install Making the appliance levelBrown Live Wire coloured green and yellow Electrical ConnectionPermitted water pressure Connecting to the water supplyPermanent Connection Water inlet Open the porthole and extract the inlet hoseFor drainage into an outlet From your Service Force CentreWater Drainage Pumping heights of over 1 metre Guarantee/Customer Service European GuaranteeLietuva Page Page For general enquiries concerning 0870 5 929Customer Care Major Appliances132 977 Subject to change without notice