Electrolux 62825 manual Interrupting a programme/adding washing, Adding washing

Page 15

Interrupting a programme/adding washing

Interrupting a programme

•A programme can at any time be interrupted by pressing the START/ PAUSE button and resumed by pressing START/PAUSE again.

•To cancel a programme before it has ended, turn the programme se- lector to OFF. Important: Be careful of water in the appliance.

Adding washing

Washing can be added, as long as the DOOR indicator is illuminated green.

1.Press the START/PAUSE button. The door can be opened.

2.Close the door and press the START/PAUSE button again. The pro- gramme will continue.

End of the wash cycle/removing the washing

At the end of the programme, END lights up on the programme progress display. The door can be opened as soon as the DOOR indicator is lit green.

1.Open the loading door and remove the washing.

2.Turn the programme knob to OFF.

3.Close the water valve.

4.After washing, pull out the detergent drawer a little to enable it to dry out. Keep the loading door very slightly open so that the washing ma- chine can air.

If RINSE HOLD has been selected:

After the rinse hold, END lights up on the programme progress display. The water must first be drained:

–Either turn the programme knob to OFF, then to DRAIN and press the START/PAUSE button (the water is drained without spinning),

–or turn the programme knob to OFF and then to SPIN. Change the spin speed if necessary and press the START/PAUSE button (the water is drained and the washing spun).

15

Image 15

Contents Lavamat Dear Customer Following symbols are used in the textContents Safety information concerning installation Installation and connection instructionsFollow the Installation and connection instructions SafetyPrior to using the appliance for the first time Child safetyResulting overheating may constitute a fire hazard General safetyControl panel Description of the applianceRefresh Programme overviewApplication/Features Care Symbols1 Sorting washing Before the first washPreparing and sorting washing Preparing washingOpen the door pull the handle on the door Running a wash cycleOpening the door/loading washing Adding detergent/conditionerSwitching on the appliance/selecting a programme If you are using liquid detergentWashing powder/tablets for the main wash cycle Changing the spin speed/selecting rinse hold Selecting additional programmesShortened wash programme for lightly soiled items Programme sequence Starting a programmeAdding washing Interrupting a programme/adding washingEnd of the wash cycle/removing the washing Interrupting a programmeDeactivating the child safety device Child safety deviceWashing drum Cleaning and maintenanceCleaning procedure Detergent dispenser drawerDoor and rubber collar Remedying small faults yourselfClean the glass in the door and the rubber collar regularly What to do ifE10 appears Tap is shut off Turn on the tap END indicator is If the wash result is not satisfactory There are grey stains on the washingFoam can still be seen following the final rinse When the water has all drained away Carrying out an emergency drainThere are white residues on the washing Drain pump Disposal Packaging materialOld appliance Consumption values Technical dataThis washing machine cannot be built-in Safety information concerning installationUnpacking Installing the applianceWhen using a sack trolley to transport the washing machine Transporting the appliancePage Remove the bracket D Refit the six smaller bolts C Making the appliance level Where to installElectrical Connection Brown Live Wire coloured green and yellowConnecting to the water supply Permanent ConnectionPermitted water pressure Open the porthole and extract the inlet hose Water inletFrom your Service Force Centre Water DrainageFor drainage into an outlet Pumping heights of over 1 metre European Guarantee Guarantee/Customer ServiceLietuva Page Page Major Appliances 0870 5 929Customer Care For general enquiries concerning132 977 Subject to change without notice