Indesit Clothes Dryer Manual for IDCE 8450 Series: Customizing Your Drying Experience
Page 10

 

Options

EN

The options allow for customising the selected programme according to one’s own needs.

 

Timed drying

 

 

After selecting a programme, press the “Timed drying” button to enter a drying time. Every time this button is pressed, the duration of

 

the selected drying cycle appears on the display. When pressed the first time, the highest allowed value for the selected cycle appears

 

on the display. When pressed each of the following times, the set time is reduced until OFF appears.

 

The buzzer will activate if the timed drying option is not available.

 

Delay Start

 

The start of some programmes (see Programmes and options) may be delayed up to 24 hours. Before selecting a programme with

 

a delayed start make sure that the water bottle is empty and the filter is clean. The drum will rotate occasionally before the drying

 

programme starts to prevent the formation of creases.

 

High Heat

 

When a drying time is selected, pressing this button sets a high heat drying and the indicator light above the button lights up. The

 

timed programmes are pre-set to low heat.

 

Fast Iron

 

This option, when selected, delivers for the cycle chosen the best humidity level to help make ironing quicker and easier. This option

 

stops the cycle at the ideal dryness level for ironing thus making ironing easier and faster. (See programme guide and options).

 

Memo

 

This option allows you to store your cycle selection along with any associated options and to easily use a previously stored cycle.

 

Delayed start options cannot be stored.

 

•Press and hold the button MEMO for 3 second to store a cycle. You can press this button when the desired cycle and associa-

 

ted options have been selected either before the cycle has started or during the drying cycle. When you press and hold the Memo

 

button the LED flashes as well as the time on the display and after 3 second a beep will confirm that the details have been stored.

 

•To recall the stored cycle simply turn on the dryer, press the memo button and then start the cycle. It is possible to change any of

 

the options in the normal way. Every 2 minutes the stored cycle number will appear on the display. If no cycle has been stored you

 

will hear a beep when the Memo button is pressed.

 

•A stored programme can be overwritten with a new programme just by repeating the steps outlined above.

 

Alarm

 

A buzzer sounds at the end of the drying cycle to signal that the programme has ended and the garments are ready to be removed.

 

Not all options are available on all programmes (see Programmes and options).

 

Opening the door

If the door is opened (or the START/PAUSE button is pressed) while a programme is running, the dryer stops and the following may occur:

•The START/PAUSE button flashes orange.

•When a delayed start is running, the delay countdown continues. It is necessary to press the START/PAUSE button to resume the “Delay start” programme. The “Delay start” indicator light flashes and the display visualises the time remaining to the start of the selected programme.

•It is necessary to press the START/PAUSE button to resume the programme. The progress indicator lights signal the running pha- se and the START/PAUSE indicator light stops flashing and turns green.

•During the post anti-crease phase, the programme ends. Pressing the START/PAUSE button reactivates a new programme from the beginning.

•By turning the Programme selection knob, a new programme is selected and the START/PAUSE indicator light flashes green. This procedure can be used to select the COOL drying programme to cool garments if they are judged to be dry enough.

Press the START/PAUSE button to start the new programme.

Note: If you have a power cut, switch off the power or remove the plug. When power is restored, plug in the machine, press and hold the ON/OFF button until the dryer reactivates, then press Start/Pause button.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Tumble Dryer Important information Filling of the Water ContainerProduct Data Ventilation InstallationWhere to install the tumble dryer Electrical connectionsDescription of the tumble dryer FeaturesControl panel See Indicator lights Sun icon Drying cycle Fan icon Cool air cycleHow to carry out a drying cycle Starting and selecting a programmeProgrammes and options Programme chartSpecial/Sport/Partial Programmes Page Options Opening the doorSorting laundry LaundryCare labels Automatic drying times Special garmentsDrying times 040-055Suggestions Save energy and respect the environmentCare and maintenance Problem Possible causes / Solutions TroubleshootingDryer is overloaded see Laundry Information on recycling and disposal AssistanceSpare parts Disposal of old household appliancesGuarantee Months Parts and Labour GuaranteeEngineer to call ManufacturerPage 05/2013 Xerox Fabriano
Related manuals
Manual 20 pages 55.8 Kb

IDCE 8450 BS H, IDCE 8450 B H, IDCE 8450 BK H specifications

The Indesit IDCE 8450 BK H, IDCE 8450 B H, and IDCE 8450 BS H are part of Indesit’s range of high-efficiency tumble dryers, designed to cater to the needs of modern households. These models are distinguished not only by their stylish appearances—available in black, white, and stainless steel—but also by their intelligent features aimed at enhancing user experience.

One of the standout characteristics of these models is their impressive drying capacity. With a generous 8 kg drum, they can handle large loads of laundry, making them ideal for families or individuals with busy lifestyles. This capacity is complemented by a range of drying programs, allowing users to select the most appropriate setting for different fabric types. Whether you’re drying cottons, synthetics, or delicates, these models provide tailored options to ensure optimal results.

Technology is at the forefront of the Indesit IDCE 8450 series. These models incorporate advanced sensor drying technology, which automatically adjusts drying time based on the moisture level in the clothes. This not only protects garments from damage due to over-drying but also enhances energy efficiency. Users can save on energy bills while taking care of their clothes.

Furthermore, the Indesit IDCE 8450 BK H, B H, and BS H have a variety of smart features. The timer delay function allows users to set the dryer to start at their convenience, offering flexibility for those who want their laundry done while they are out. Also, the reverse action drum helps reduce tangling, making it easier to unload clothes and minimizing creases.

In terms of usability, these dryers come equipped with a clear display and easy-to-navigate controls. Cleaning the dryer is also hassle-free with removable filters that ensure maintenance is straightforward and quick.

Overall, the Indesit IDCE 8450 BK H, IDCE 8450 B H, and IDCE 8450 BS H combine functionality, efficiency, and stylish design, making them perfect choices for users looking to simplify their laundry routine while ensuring the best care for their garments. With a focus on technology and user-friendly features, these models represent the best of modern laundry solutions, catering to the diverse needs of today's consumers.
Top Page Image Contents