Indesit IDCA 835 S instruction manual Options, Opening the door

Page 10

 

Options

 

EN

The options allow for customising the selected programme according to one’s own needs.

 

Delay timer

 

 

The start of some programmes (see Programmes and options) may be delayed up to 9 hours. Press the button repeatedly to

 

enter the desired delay time. Before setting a delayed start, make sure that the water container is empty and that the filter is clean.

 

Post Care

 

When this option is selected, the drum rotates garments at intervals after the cold drying cycle has ended, in order to avoid

 

creases forming on garments if they cannot be immediately removed at the end of the programme. During this phase, the indicator

 

light is turned on.

 

Pre Care

 

When this option is selected in addition to the “Delay timer” option, the drum rotates garments at intervals during the delay period

 

to avoid creases forming.

 

High Heat

 

When a drying time is selected, pressing this button sets high heat drying and the indicator light above the button lights up. The

 

timed programmes are pre-set to low heat.

￿Not all options are available on all programmes (see Programmes and options).

Opening the door

If the door is opened (or the START/PAUSE button is pressed) while a programme is running, the dryer stops and the following may occur:

The START/PAUSE button flashes orange.

When a delayed start is running, the delay countdown continues. It is necessary to press the START/PAUSE button to resume the “Delay timer” programme. One of the “Delay timer” indicator light flashes to signal the delay time entered.

It is necessary to press the START/PAUSE button to resume the programme. The progress indicator lights signal the running phase and the START/PAUSE indicator light stops flashing and turns green.

During the post care phase, the programme ends. Pressing the START/PAUSE button reactivates a new programme from the beginning.

By turning the Programme selection knob, a new programme is selected and the START/PAUSE indicator light flashes green. This procedure can be used to select the Cold drying programme to cool garments if they are judged to be dry enough.

Press the START/PAUSE button to start the new programme.

Note: In the event of a power cut, turn the power switch off and remove the plug; when the electricity supply returns, press the START/PAUSE button to resume the programme.

10

Image 10
Contents Tumble Dryer Important information Filling of the Water ContainerPage Ventilation InstallationWhere to install the tumble dryer Electrical connectionsDescription of the tumble dryer FeaturesControl panel Indicator lights How to carry out a drying cycle Starting and selecting a programmeProgrammes and options Programme chartSpecial/Sport/Partial Programmes Fabric Load 5 kg Options Opening the doorSorting laundry LaundryCare labels Drying times Special itemsAutomatic drying times Information on recycling and disposal General safetySuggestions Saving energy and respecting the environmentCare and maintenance Problem Possible causes / Solutions TroubleshootingAssistance Centre see Assistance Comparative programmes AssistanceSpare parts Before contacting the Technical Assistance EN CentreMonths Parts and Labour Guarantee GuaranteeReplacement of any removable parts made of glass or plastic Essential Contact Information After Sales ServiceRecycling & Disposal Information Page 195075953.03
Related manuals
Manual 20 pages 24.06 Kb