Installation, Ventilation, Water drain

Installation

Where to install the tumble dryer

Electrical connections

EN	• Install the dryer far from gas
	• Install the dryer far from gas
	ranges, stoves, radiators or
	hobs, as flames may damage it.
	If the dryer is installed below a
	worktop, ensure there are 10
	mm between the upper panel of
	the dryer and any objects
	above it, and 15 mm between
	the sides of the machine and
	the walls or furniture units
	adjacent to it. This ensures
	adequate air circulation.

10 mm

15 mm 15 mm

Before plugging the appliance into the socket, check the following:

• Make sure your hands are dry.

• The socket must have an earth connection.

• The socket must be able to withstand the machine’s

maximum power output as indicated on the data plate (see

Description of the tumble dryer).

• The power supply voltage must fall within the values indicated

on the data plate (see Description of the tumble dryer).

• The socket must be compatible with the dryer’s plug.

Should this not be the case, replace the plug or the socket.

Do not use extension cords.

The dryer must not be installed outdoors, even if the space is

sheltered. It can be very dangerous if exposed to rain or storms.

Once installed, the dryer’s electrical wire and plug must

Ventilation

•The room must be adequately ventilated while the dryer is running. Make sure that the dryer is installed in a room free of humidity and with adequate air circulation. The flow of air around the dryer is essential to allow water to condense during drying; the dryer will not function properly if it is placed in an enclosed space or inside a cabinet.

!Some condensation may form if the dryer is used in a small or cold room.

!We do not recommend installing the dryer in a cupboard; moreover, never install the machine behind a lockable, sliding or hinged door located on the opposite side of the dryer door.

Water drain

If your dryer is installed next to a drain the water can be plumbed into this drain. This does away with the need to empty the water container. If the dryer is stacked onto or installed next to a washing machine it can share the same drain. The height of the drain must be less than 3' (1 m) from the bottom of the dryer.

Remove existing hose from position shown in picture A and fit a suitable length of hose and connect as shown in picture B.

!Make sure that the hose is not squashed or kinked when the dryer is in its final location.

1 2

2 H<1m

Picture A

Picture B

be within reach.

The power cord must not be bent or squashed.

The power cord is supplied fitted with a BS1363 plug

and with a 13 amp BS1362 fuse. If it is necessary to fit a

replacement fuse, it must be a 13 Amp ASTA approved

to BS1362 type. WARNING: The plug must not be used

without a fuse cover. If a replacement fuse holder/cover is

required, it must be of the same colour coding or wording as

shown on the base of the plug.

Replacements are available from authorised dealers.

Moulded plug

Changing the plug

The wires in the power cord are coloured in accordance with the following.

Green and Yellow (Earth)			13A ASTA approved fuse
wire to terminal marked			to BS 1362.
“E”, symbol x, or coloured	GREEN &
green and yellow.	YELLOW
	BROWN	13 ampere fuse
	BROWN
			Brown (live) wire to teminal
Blue (Neutral) wire to	BLUE	CROSS-BAR	marked “L” or coloured
terminal marked ”N” or		CORD GRIP	red.
coloured black.

If the plug being replaced is a non-rewirable type, then the cut-off plug must be disposed of safely. DO NOT leave it where it can be inserted into a socket and create a shock hazard.

The power cord should be checked periodically and replaced by a cord specially prepared for this dryer and fitted only by authorized technicians (see Service). New or longer power cords are supplied at an extra charge by authorized dealers.

The manufacturer denies any responsibility should any of these rules not be followed.

If in doubt about any of the above consult a qualified electrician.

Preliminary information

Once the tumble dryer is installed, clean the inside of the drum before operating it and remove any dirt accumulated during transportation.

IDCE 845, IDCE 845 S specifications

The Indesit IDCE 845 S is a reliable and efficient condenser tumble dryer designed to meet the demands of modern households. This appliance combines ease of use with advanced technology, making it a popular choice among consumers looking for a perfect blend of functionality and performance.

One of the standout features of the IDCE 845 S is its large 8 kg capacity. This enables users to dry a substantial amount of laundry in a single load, which is ideal for families or individuals with busy lifestyles. The dryer is equipped with multiple drying programs, including cotton, synthetic, and delicate settings, providing optimal care for a variety of fabrics. This versatility ensures that users can easily find the right cycle for their specific laundry needs.

Energy efficiency is a significant consideration for many appliance buyers, and the Indesit IDCE 845 S does not disappoint. With an energy rating of B, it offers a balance between effective drying performance and lower energy consumption. This helps in reducing utility bills while also being environmentally friendly.

The technology employed in the IDCE 845 S includes a sensor drying system that automatically adjusts the drying time based on the moisture level detected in the laundry. This feature helps prevent over-drying, preserving the quality of clothes and linens while ensuring optimal energy usage. The ease of use is further enhanced by the intuitive control panel, which includes straightforward settings and an easy-to-read LED display.

Another notable characteristic of this tumble dryer is its compact design, making it suitable for placement in smaller spaces without compromising on performance. The machine is also equipped with a large, easy-to-empty water tank, allowing for hassle-free maintenance and operation.

Noise levels are another essential aspect for many users, and the Indesit IDCE 845 S operates relatively quietly, making it a suitable option for homes where noise can be a concern. Additionally, the appliance is designed with safety features such as overheat protection, providing peace of mind during operation.

In summary, the Indesit IDCE 845 S is a robust and feature-rich condenser tumble dryer that efficiently tackles laundry drying needs. With its spacious capacity, advanced drying technologies, energy efficiency, and user-friendly design, it proves to be a valuable addition to any household. Whether for a busy family or an individual, this model offers convenience and performance that can make laundry days a breeze.