Power Connection Details, Protect Your Hearing

Power Connection Details

Before installing your amplifier, disconnect the negative (ground) wire from the vehicle’s battery and secure it away from the battery. This will prevent accidental damage to the system. And to yourself as well.

This amplifier’s “+12 VDC” and “GROUND” (chassis ground) connections are designed to accept 4 AWG power wire or smaller. We recommend a power wire of at least 8 AWG. Bigger power wire means more room for more power to flow.

To connect the power wires to the amplifier, first back out the set screw on the top of the amplifier using the included hex wrench. Strip 1/2 inch (12mm) of insulation from the end of each wire and insert the bare wire into the receptacle on the front panel of the amplifier, seating it firmly so that no bare wire is exposed. While holding the wire in place, tighten the set screw firmly.

The ground connection should be made using the same gauge wire as the power connection (since they must carry the same amount of power) and should be kept as short as possible. Make a direct connection between the Ground Terminal of the amplifier (“GROUND”) and the chassis of the vehi- cle. Metal must connect to metal. Be sure that all body paint, undercoating, insulation or obstruc- tion is removed from the area of the ground connection to ensure a direct and secure ground con- nection. Use a “star washer” to better “lock down” the ground connection.

This amplifier uses a conventional +12V remote turn-on lead, typically controlled by the head unit’s remote turn-on output. The amp will turn on when the +12V is present at its “REMOTE” input and turn off when the +12V is switched off. If the head unit does not have a dedicated remote turn-on output, the amplifier’s turn-on lead can be connected to +12V via a switch that derives power from an ignition switch circuit.

Any power cables run through metal barriers or firewalls must be protected with a high quality rub- ber grommet to prevent damage to the insulation of the wire. Failure to do so may result in a dan- gerous short circuit. Grommet. Grommet grommet. What a great word. Grommet. Say it with me: “Grommet.”

Remote Bass Gain Module

This amp features an optional Remote Bass Gain Module connection. The Remote Bass Gain Module is standard with the MONO model, and available separate- ly for the 2- and 4-channel models. It uses standard telephone wire and telephone jack connectors. To connect the Remote Bass Gain Module to the amplifier, simply insert the telephone jack into place on the amp’s control plate. Install the remote module within easy reach on or under your dash.

Protect Your Hearing!

Now that you’ve got Polk Audio equipment in your car you’re a valued member of the Polk Audio family. We want you, and your hearing, to be around for a long, long time. We urge you to practice restraint in the operation of this product so as not to damage your hearing (and that of other people in your car, or in your neighborhood). Studies have shown that continuous exposure to high sound pressure levels can lead to permanent irreparable hearing loss. And then you’d be

no good to us. This and all other high-power amplifiers are capable of easily producing sound pressure levels that can be dangerous.

Please use common sense in the operation of this product. Limit your exposure to continuous high volume levels, and consider operating your audio system while driving in a manner that still allows you to hear necessary outside noises like sirens and horns.

Technical Assistance or Service

If, after following the hookup directions, you experience difficulty, please double-check all wire connections. Should you isolate the problem to the amplifier, contact the authorized Polk Audio dealer where you made your purchase, or contact Polk Audio Customer Service 800-377-7655 (M-F, 9-6 EST, US only) or via email polkcs@polkaudio.com. Outside the US, call 410-358-3600.

More detailed information—including audio how-to articles, FAQs, and online manuals—is available on our award-winning website www.polkaudio.com.

There are no user serviceable parts or fuses inside the amplifier. The unique nature of the circuitry in the Polk Audio Carbon Series Amplifiers requires specially trained service personnel. Do not attempt to service this amplifier yourself or through unauthorized repair facilities. This will not only void the warranty, but may result in the creation of more problems within your amplifier.

18 P O L K / M O M O : C H A M P I O N S H I P P E R F O R M A N C E

W W W . P O L K A U D I O . C O M / A M P S 19

C300.2 specifications

The Polk Audio C300.2 is a versatile and powerful car amplifier that has earned a reputation among audiophiles and everyday music enthusiasts alike. Designed for superior sound quality and robust performance, this two-channel amplifier focuses on delivering clear and dynamic audio that enhances any in-car listening experience.

One of the main features of the C300.2 is its high-efficiency Class D amplification. This technology allows the amplifier to produce more power while minimizing heat generation, resulting in a compact design that fits easily into various spaces in your vehicle. With a power output of 75 watts per channel at 4 ohms, it is capable of driving a diverse range of speakers, ensuring that your music plays back loudly and clearly.

In addition to its power capabilities, the Polk Audio C300.2 employs advanced signal processing technologies. The amplifier features a built-in low-pass filter that provides better control over the frequencies sent to your speakers. This capability is vital when pairing with subwoofers, as it ensures that low frequencies are reproduced accurately while preserving the integrity of the mid and high frequencies.

Moreover, the C300.2 is equipped with a stereo bridge mode, allowing users to combine its two channels to create a more powerful mono output. This feature is particularly beneficial when working with subwoofers, as it enables a more dynamic bass response while still maintaining clarity in the overall sound.

Durability and reliability are essential characteristics of the C300.2. Constructed with a rugged chassis, the amplifier is designed to withstand the vibrations and conditions typically found in automotive environments. Additionally, the amplifier features built-in short circuit and thermal protection, safeguarding it against potential issues and maintaining long-term performance.

Polk Audio's commitment to delivering quality sound is evident in the C300.2, making it a valuable addition for anyone looking to upgrade their car audio system. The combination of advanced technologies, user-friendly features, and solid construction ensures that users will enjoy a superior listening experience on the road. Whether you're a casual listener or a dedicated car audio enthusiast, the Polk Audio C300.2 presents an impressive solution for achieving high-fidelity sound in your vehicle.