Polk Audio owner manual C300.2 Specifications Polk/MOMO Series Limited Warranty, 34 x 24.8 x

Page 11

C300.2 Specifications

Polk/MOMO Series Limited Warranty

Power Output: RMS Continuous Power (at 14.4V at the input terminals, 20Hz - 20kHz)

Per Channel into 4 Ohms (0.1% THD+N)

150W

Per Channel into 2 Ohms (1% THD+N)

220W

Bridged into 4 Ohms (1% THD+N)

550W

Total Dynamic Power

850W

Frequency Response (-3dB Points)

<15Hz to 45kHz

Signal-to-Noise (Referenced to rated power) ...

>105dBA

Channel Crosstalk (at 1kHz)

>55dB

Input Sensitivity

200mV to 8.0V

Remote Gain Control

0 to -30dB

Input Impedance

>10k Ohms

Speaker Impedance

>2 Ohms Stereo

...........................................................................

>4 Ohms Bridged

Power Requirement

10V to 16V DC Negative Ground

Crossover Filters

 

Filter Function

High Pass, Low Pass, Off

Slope

18dB/Octave

Frequency (-3db Points)

50Hz to 250Hz

Subsonic Filter

24dB/Octave at 15Hz

Pre-EQ

 

LP Center Frequency

40Hz

Bandwidth

1/3 Octave

Gain

+9dB

HP Corner Frequency

10.1kHz

Slope

12dB/Octave

Gain

+10dB

Dimensions (L x W x H)

 

Inches

13.38 x 9.75 x 2.5

Centimeters

34 x 24.8 x 6.35

Polk Audio, Inc., warrants to the original retail purchaser only. This warranty will terminate automatically prior to its stated expiration if the original retail purchaser sells or transfers the Product to any other party.

Polk Audio, Inc., warrants, to the original retail purchaser only, that the LOUDSPEAKER(S), PASSIVE CROSSOVER COMPONENT(S) and ENCLOSURE on this Polk Audio Loudspeaker Product will be free from defects in material and workmanship for a period of one (1) year from the date of original retail purchase from a Polk Audio Authorized Dealer.

Furthermore, Polk Audio, Inc., warrants, to the original retail purchaser only, that any AMPLIFIER OR OTHER ELECTRONIC COMPONENT will be free from defects in material and workmanship for a period of one (1) year (extended to two years when professionally installed) from the date of original retail purchase from a Polk Audio Authorized Dealer.

To allow Polk Audio to offer the best possible warranty service, please register your new product online at: www.polkaudio.com/registration or call Polk customer service 800-377-7655 in the USA and Canada (outside the USA: 410-358-3600) within ten (10) days of the date of original purchase. Be sure to keep your original purchase receipt.

Defective Products must be shipped, together with proof of purchase, prepaid insured to the Polk Audio Authorized Dealer from whom you purchased the Product, or to the Factory at 2550 Britannia Boulevard, Suite A, San Diego, California 92154. Products must be shipped in the original shipping container or its equivalent; in any case the risk of loss or damage in transit is to be borne by you. If upon examination at the Factory or Polk Audio Authorized Dealer it is determined that the unit was defective in materials or workmanship at any time during this Warranty period, Polk Audio or the Polk Audio Authorized Dealer will, at

its option, repair or replace this Product at no additional charge, except as set forth below. All replaced parts and Products become the property of Polk Audio. Products replaced or repaired under this warranty will be returned to you, within a reasonable time, freight prepaid.

This warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures, commercial use, voltage inputs in excess of the rated maximum of the unit, cosmetic appearance of cabinetry not directly attributable to defect in materials or workman- ship, or service, repair, or modification of the Product which has not been authorized or approved by Polk Audio. This warranty shall terminate if the Serial number on the Product has been removed, tampered with or defaced.

This warranty is in lieu of all other expressed Warranties. If this Product is defective in materials or workmanship as warranted above, your sole remedy shall be repair or replace- ment as provided above. In no event will Polk Audio, Inc. be liable to you for any incidental or consequential damages arising out of the use or inability to use the Product, even if Polk Audio, Inc. or a Polk Audio Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you.

All implied warranties on this Product are limited to the duration of this expressed Warranty. Some states do not allow limitation on how long an implied Warranty lasts, so the above limitations may not apply to you. This Warranty gives you specific legal rights, and you also may have other rights which vary from state to state.

This Warranty applies only to Products purchased in Canada, the United States of America, its possessions, and U.S. and NATO armed forces exchanges and audio clubs.

The Warranty terms and conditions applicable to Products purchased in other countries are available from the Polk Audio Authorized Distributors in such countries.

20 P O L K / M O M O : C H A M P I O N S H I P P E R F O R M A N C E

 

W W W . P O L K A U D I O . C O M / A M P S 21

Image 11
Contents C300.2 Carbon Series Optional Accesories Polk Audio-A Passion for SoundGetting Started Tools you May Need All Carbon Series Amplifier Models FeatureC300.2 Features Read This FirstDo not run wires under your vehicle or outside your vehicle Installing Your New Polk Audio AmplifierSecurely install the amplifier in your chosen location Typical InstallationComplete Amp Panel Layout Wire Routing OptionsChannel Coax Hook-Up Settings Detailed Adjustments for the Amp PanelSystem Subwoofer Settings BridgedPage Protect Your Hearing Power Connection DetailsTechnical Assistance or Service Remote Bass Gain Module34 x 24.8 x C300.2 Specifications Polk/MOMO Series Limited WarrantyPage RM0657-2
Related manuals
Manual 24 pages 42.88 Kb

C300.2 specifications

The Polk Audio C300.2 is a versatile and powerful car amplifier that has earned a reputation among audiophiles and everyday music enthusiasts alike. Designed for superior sound quality and robust performance, this two-channel amplifier focuses on delivering clear and dynamic audio that enhances any in-car listening experience.

One of the main features of the C300.2 is its high-efficiency Class D amplification. This technology allows the amplifier to produce more power while minimizing heat generation, resulting in a compact design that fits easily into various spaces in your vehicle. With a power output of 75 watts per channel at 4 ohms, it is capable of driving a diverse range of speakers, ensuring that your music plays back loudly and clearly.

In addition to its power capabilities, the Polk Audio C300.2 employs advanced signal processing technologies. The amplifier features a built-in low-pass filter that provides better control over the frequencies sent to your speakers. This capability is vital when pairing with subwoofers, as it ensures that low frequencies are reproduced accurately while preserving the integrity of the mid and high frequencies.

Moreover, the C300.2 is equipped with a stereo bridge mode, allowing users to combine its two channels to create a more powerful mono output. This feature is particularly beneficial when working with subwoofers, as it enables a more dynamic bass response while still maintaining clarity in the overall sound.

Durability and reliability are essential characteristics of the C300.2. Constructed with a rugged chassis, the amplifier is designed to withstand the vibrations and conditions typically found in automotive environments. Additionally, the amplifier features built-in short circuit and thermal protection, safeguarding it against potential issues and maintaining long-term performance.

Polk Audio's commitment to delivering quality sound is evident in the C300.2, making it a valuable addition for anyone looking to upgrade their car audio system. The combination of advanced technologies, user-friendly features, and solid construction ensures that users will enjoy a superior listening experience on the road. Whether you're a casual listener or a dedicated car audio enthusiast, the Polk Audio C300.2 presents an impressive solution for achieving high-fidelity sound in your vehicle.