Supply voltage is included within the values

Connecting the drain hose

• the supply voltage is included within the values i

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

ndicated on the Technical details tableGB (see page 5);

•the socket is compatible with the washing machine’s plug. If this is not the case, replace the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under- sink trap. Before connec- ting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is place over the edge of a basin or sink be sure the free end of the hose should not be underwa- ter.

WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through parti- tions, units etc., please ensure that either:

!We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 in- ches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the applicable law;

•the socket is able to sustain the appliance’s maximum power load indicated in the Technical details table (see page 5);

the plug is replaced by a fused 13 ampere re-wearable plug bearing the BSI mark of approval.

or:

the mains cable is wired directly into a 13 amp cable out- let, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow Earth

Blue Neutral

Brown Live

IWDD 7143 S specifications

The Indesit IWDD 7143 S is a versatile and efficient washer-dryer combination that caters to the needs of modern households. With a sleek design and a host of innovative features, this appliance makes laundry day more manageable and time-efficient.

At the heart of the IWDD 7143 S is its impressive capacity. It boasts a 7 kg wash load and a 5 kg drying load, enabling users to tackle larger laundry tasks without frequent interruptions. This dual functionality means that users can wash and dry their clothes in one cycle, saving both time and space in the home.

One of the standout features of the Indesit IWDD 7143 S is its range of wash programs. With 16 different settings, this machine can handle various fabric types and soil levels, from delicate garments to heavily soiled work clothes. Program options include Cotton, Synthetics, Wool, and a quick wash setting, designed for when you need clean clothes in a hurry.

In terms of drying capabilities, the IWDD 7143 S employs a sensor drying system that ensures laundry is not only dried efficiently but also protected from over-drying. This technology helps preserve the quality of fabrics, making it ideal for users who prioritize garment longevity. The dryer settings include options for straight to hang, cupboard dry, and iron dry, allowing for customized drying results.

Energy efficiency is another core characteristic of the Indesit IWDD 7143 S. Rated with an A rating for washing and a B rating for drying, this model is designed to help users save on electricity bills while also being kinder to the environment. The appliance comes equipped with a delay timer, allowing users to schedule wash and dry cycles during off-peak energy hours for further savings.

Other notable features include a clear digital display for easy program selection and monitoring, and a child lock function to ensure safety during operation. The Indesit IWDD 7143 S is also designed for low noise levels, making it a suitable option for households where peace and quiet are a priority.

Overall, the Indesit IWDD 7143 S washer-dryer combination stands out with its thoughtful design, range of features, and commitment to efficiency, making it a valuable addition to any home looking to streamline their laundry processes.