Troubleshooting

Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure
		GB
that the problem cannot be solved easily using the following list.
Problem:	Possible causes / Solutions:

The machine does not switch on.

The wash cycle does not start.

The machine does not fill with wa- ter or ‘H20’ flashes in the display.

The machine continuously fills with water and continually drains away or Water left in the drum

or Stuck on wash.

The machine does not drain or spin or F05 error code in the display.

The machine does not heat or poor wash results.

The programme takes too long or The Display changes the esti- mated ‘Time to End’ during the programme.

The machine vibrates a lot during the spin cycle.

•The appliance is not plugged into the socket fully, or not enough to make contact.

•There is no power to the socket, or the fuse has blown in the mains plug.

•The door is not closed properly.

•The ON/OFF button has not been pressed.

•The START/PAUSE button has not been pressed.

•The water tap has not been turned on to allow water to flow into the machine.

•A delayed start has been set.

•The water inlet hose is kinked.

•The water inlet hose is not connected to the water supply.

•The water pressure is too low.

•The water tap has not been turned on to allow water to flow into the machine.

•There is no water supply to the house.

•The inlet valve filter is blocked.

•The START/PAUSE button has not been pressed.

•The top of the drain hose is too low - It must be fitted at a height between 65 and 100 cm from the floor (see “Installation”).

•The drain hose is connected incorrectly to the sink trap allowing water to run into the machine, the drain hose must be positioned higher than the bottom of the sink to prevent water flowing down the drain hose.

•The end of the drain hose has been pushed too far down the standpipe, the ‘U’ bracket should be fitted 100 mm from the end of the drain hose.

•The Pump filter is blocked.

•The drain hose is kinked (see “Installation”).

•New Installation - The blanking cap or spigot has not been removed if connected under a sink.

•The drain hose or sink trap is blocked.

•The wash cycle does not include draining, some wash cycles require the drain phase to be started manually.

•The ‘EASY IRON’ option is enabled, to complete the wash cycle press the ‘START/PAUSE’ button.

•The Spin Speed is set to “OFF”.

•The Temperature is set to “OFF”.

•Programme times will vary due to water pressure, the incoming water tempera- ture and if the wash load goes out of balance. This will increase the programme times accordingly (see ‘ The machine wont spin properly’ below).

•The feet have not been adjusted, enabling the machine to rock.

•New Installation - Either the Transit Bolts including the plastic spacers, or the Polystyrene Packaging have not been removed when installing the machine.

•The machine is trapped between cabinets and/or walls.

•The load is in a slight out of balance condition and machine is spinning, but at a lower speed.

The machine is noisy.

• There will always be some motor, pump and drum noise during spin.

IWE 91281 specifications

The Indesit IWE 91281 is a modern washing machine designed to cater to the needs of households looking for efficiency, performance, and cutting-edge technology. With a sleek and compact design, it seamlessly fits into any laundry space, making it an ideal choice for both large and small homes alike.

One of the standout features of the Indesit IWE 91281 is its impressive 9 kg capacity. This allows users to wash larger loads in a single cycle, saving time and energy. The machine’s maximum spin speed of 1200 RPM ensures that clothes come out drier, reducing the need for additional drying time. This is particularly beneficial for busy families, where time-saving solutions are essential.

The IWE 91281 includes a variety of wash programs designed to handle different fabric types and laundry needs. From delicate fabrics to heavily soiled items, the machine offers tailored cycles to ensure optimal cleaning performance. Notably, it features specialized programs such as Cotton, Synthetics, and Eco cycles, which caters to energy-conscious consumers looking to minimize their environmental impact without compromising on cleanliness.

Incorporating advanced washing technologies, the IWE 91281 utilizes the innovative Push & Wash feature. This allows users to start a wash cycle with just a single button press, simplifying the washing process. Additionally, it is equipped with a delay timer, allowing users to set a wash to begin at a more convenient time.

The machine’s energy efficiency rating is commendable, which translates to lower energy bills and a reduced carbon footprint. Its design focuses on minimizing water and energy consumption while maintaining effective cleaning results, making it an eco-friendly choice.

Furthermore, the Indesit IWE 91281 comes with a range of additional features, such as a clear digital display for easy program selection, child lock functionality for safety, and an adjustable spin speed feature. These characteristics enhance the overall user experience, ensuring that washing clothes is as convenient and efficient as possible.

In summary, the Indesit IWE 91281 is a well-rounded washing machine that combines capacity, technology, and efficiency, making it an excellent addition to any home. With its intuitive features and emphasis on user convenience, it represents a practical solution for today’s laundry challenges.