Care and maintenance

Cutting off the water or electricity

GB supply

•Turn off the water tap after every wash. This will limit the wear of your appliance’s water system and also prevent leaks.

•Unplug your appliance when cleaning it and during all maintenance operations.

Cleaning your appliance

The exterior and rubber parts of your appliance can be cleaned with a soft cloth soaked in lukewarm soapy wa- ter. Do not use solvents or abrasives.

2.clean the interior thoroughly;

3.screw the lid back on.

Checking the water inlet hose

Check the water inlet hose at least once a year. If you see any cracks, replace it immediately: during the wash cycles, water pressure is very strong and a cracked hose could easily split open.

!Never use hoses that have already been used.

Cleaning the detergent dispenser

Remove the dispenser by pulling it out (see figure). Wash it under running wa- ter; this operation should be repeated frequently.

Caring for your appliance door and drum

•Always leave the appliance door ajar to prevent unple- asant odours from forming.

Cleaning the pump

The washing machine is fitted with a self-cleaning pump that does not require any maintenance. Sometimes, small items (such as coins or buttons) may fall into the pre- chamber that protects the pump, situated in the lower part of the same.

!Make sure the wash cycle has ended and unplug the appliance.

To access the pre-chamber:

1. unscrew the lid rota- ting it anti-clockwise (see figure): a little water may trickle out. This is perfectly normal;