Washing machine description, Control panel, Leds

Washing machine description

Control panel

Detergent dispenser

Detergent dispenser: to add detergent and fabric softener (see page 12).

LEDS: to find out which wash cycle phase is under way. If the Delay Timer function has been set, the time left until the programme starts will be indicated (see page 21).

SPIN SPEED knob: to set the spin speed or exclude the spin cycle completely (see page 11).

FUNCTION buttons: to select the functions available. The button corresponding to the function selected will remain on.

TEMPERATURE knob: to set the temperature or the cold wash cycle (see page 11).

START/RESET button: to start the programmes or cancel any incorrect settings.

ON-OFF/DOOR LOCK Led: to find out whether the washing machine is on and if the appliance door can be opened (see page 9).

ON/OFF button: to turn the washing machine on and off.

	FUNCTION	ON-OFF/DOOR
	Buttons	ON-OFF/DOOR
	Buttons	LOCK Led
Leds

			ON-OFF



			Button

			PROGRAMME
			PROGRAMME
			Knob
SPIN SPEED		START/RESET
Knob		START/RESET
Knob		Button
		Button

	TEMPERATURE
	Knob

PROGRAMME knob: to select the wash programmes. The knob stays still during the cycle.

Standby mode

This washing machine, in compliance with new energy saving regulations, is fitted with an automatic standby system which is enabled after about 30 minutes if no acti- vity is detected. Press the ON-OFF button briefly and wait for the machine to start up again.