Hotpoint HVL 241 manual Troubleshooting, Problem, Possible causes/Solution

Page 13

Troubleshooting

Your washing machine could fail to work. Before calling for “Assistance” (see page 14), make sure the problem

can't easily be solved by consulting the following list.

G B

 

Problem

The washing machine won't s t a r t .

The wash cycle won't start.

The washing machine fails to load water.

The washing machine continuously loads and unloads water.

The washing machine does not drain or spin.

The washing machine vibrates too much during the spin

c y c l e .

The washing machine leaks.

The ON-OFF/DOOR LOCKED Led flashes rapidly at the same time as at least one other LED.

There is too much foam.

Possible causes/Solution:

The appliance is not plugged into the socket, or not enough to make contact.

There has been a power failure.

The appliance door is not shut properly.

The ON/OFF button has not been pressed.

The START button has not been pressed.

The water tap is not turned on.

The water inlet hose is not connected to the tap.

The hose is bent.

The water tap is not turned on.

There is a water shortage.

The water pressure is insufficient.

The START button has not been pressed.

The drain hose is not fitted between 65 and 100 cm from the floor (see page 3).

The free end of the hose is underwater (see page 3).

The wall drainage system doesn't have a breather pipe.

If the problem persists even after these checks, turn off the water tap, switch the appliance off and call for Assistance. If the dwelling is on one of the upper floors of a building, there may be drain trap problems causing the washing machine to load and unload water continuously. In order to avoid such an inconvenience, special anti- drain trap valves are available in shops.

The programme does not foresee the draining: some programmes require enabling the draining manually (see page 8).

The “Easy Iron” function is enabled: to complete the programme, press the START button (see page 9).

The drain hose is bent (see page 3).

The drain duct is clogged.

The drum was not unblocked correctly during installation (see page 2).

The washing machine is not level (see page 2).

The washing machine is closed in between furniture cabinets and the wall (see page 2).

The water inlet hose is not screwed on correctly (see page 2).

The detergent dispenser is obstructed (to clean it, see page 12).

The drain hose is not secured properly (see page 3).

Switch off the machine and unplug the appliance; wait for approximately 1 minute then switch it on again.

If the problem persists, contact Assistance.

The detergent is not suitable for machine washing (it should bear the definition "for washing machines" or "hand and machine wash", or the like).

You used too much detergent.

1 3

Image 13
Contents Washing Machine Instructions for useUnpacking and levelling InstallationElectric and water connections V e Blue Neutral N Brown Live L Green & Yellow Earth E First wash cycleTechnical details Control panel Washing machine descriptionD s Briefly starting a programme Starting and ProgrammesProgramme table Personalisations Setting the temperatureFunctions Detergent dispenser Detergents and laundrySpecial items Preparing your laundryGeneral safety Precautions and adviceDisposal Saving energy and respecting the environmentCare and maintenance Problem TroubleshootingPossible causes/Solution Assistance BGuaranteeAfter Sales Service 195066375.00

HVL 241 specifications

The Hotpoint HVL 241 is a modern and efficient undercounter freezer that is designed to meet the demands of contemporary kitchens while offering a range of features that enhance convenience and usability. This appliance is particularly suitable for those who require extra storage space without the bulk of a large freezer.

One of the main features of the Hotpoint HVL 241 is its generous 242 liters of storage capacity. This spacious interior is efficiently organized to allow for easy access and optimal storage of various food items. The freezer is equipped with transparent drawers, which make it easy to see what's inside without having to open each drawer. This helps to minimize frost accumulation and allows for efficient organization of food products.

The HVL 241 is designed with energy efficiency in mind, boasting an impressive A++ energy rating. This not only helps to reduce electricity bills but also ensures that the appliance has a lower environmental impact, making it a sustainable choice for energy-conscious consumers.

In terms of technology, the Hotpoint HVL 241 features a fast freeze function that quickly lowers the temperature inside the freezer when new items are added. This is particularly useful for preserving the freshness of recently purchased food and prevents temperature fluctuations that can compromise food quality. Additionally, the freezer includes a temperature alarm that alerts users when the internal temperature rises above the safe threshold, providing peace of mind for those concerned about food safety.

Another noteworthy characteristic of the Hotpoint HVL 241 is its frost-free technology. This feature eliminates the need for manual defrosting, as it prevents the build-up of ice within the freezer. This not only saves time and effort but also maximizes usable storage space.

The design of the HVL 241 is sleek and modern, making it an attractive addition to any kitchen. Its compact profile allows it to fit seamlessly under countertops, making it an excellent choice for smaller spaces.

Overall, the Hotpoint HVL 241 undercounter freezer combines practicality with advanced technology to provide a reliable and efficient freezing solution for households. With its ample capacity, energy efficiency, and user-friendly features, it is ideal for anyone looking to maintain the quality and longevity of their frozen foods.