Contents |
|
Burner Application Scope and Intended Use | 2 |
Prepare Before Installing | 3 |
Specifications | 3 |
Notice Special Requirements | 3 |
General Information | 4 |
A. Equipment Located in Confined Space | 4 |
B. Exhaust Fans and Other | 4 |
C. Clearances to Burner and Equipment | 4 |
D. Exhausting Hazardous Fumes | 4 |
E. Low Firing Rate Baffle | 5 |
Nozzle Assembly Maintenance | 5 |
A. Replace the Burner Nozzle | 5 |
B. Check/Adjust Electrodes | 6 |
C. Igniter Maintenance | 6 |
D. Servicing Nozzle Line Assembly | 6 |
E. Check/Adjust “Z” Dimension | 6 |
Fuel Supply | 7 |
A. Connect Fuel Lines | 7 |
B. Fuel Supply Level with or Above Burner | 7 |
C. Fuel Supply Below Level of Burner | 7 |
D. Fuel Line Replacement (Remote Tank Only) | 7 |
E. Fuel Line Valve and Filter | 7 |
Burner Wiring | 7 |
A. Burner installed on equipment | 7 |
B. Burner Replacement | 7 |
Drive Component Maintenance | 9 |
A. Motor, Blower Wheel, and Coupling Replacement | 9 |
B. Pump Maintenance | 10 |
C. Valve Coil and Stem Replacement | 10 |
Start Up Burner & Set Combustion | 10 |
A. Basic Burner Operation | 10 |
B. Combustion | 11 |
C. Set Combustion with Instruments | 11 |
Maintain & Service Burner | 12 |
A. Owner’s Information | 12 |
B. Owner Service and Maintenance | 12 |
Extended Down Time | 12 |
Regular Service/Maintenance | 12 |
Troubleshooting | 13 |
Replacement Parts | 15 |
Limited Warranty Information | 16 |
Hazard Definitions
Indicates a hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a hazardous situation, which, if not avoided, could
result in death or serious injury.
Indicates a hazardous situation, which, if not avoided, could
result in minor or moderate injury.
Within the boundaries of the hazard warning, there will be information presented describing consequences if the warning is not heeded and instructions on how to avoid the hazard.
Intended to bring special attention to information, but not related to
personal injury or property damage.
Burner Application Scope and Intended Use
The ADC burner is designed for use in road maintenance equipment applications that have DC voltage charging systems capable of sustaining the specified voltage requirements. For other equipment applications, please contact Beckett Technical Services at
2