Beckett ADC manual Section Burner Wiring

Section: Burner Wiring

Figure 6A. Typical Wiring For Constant Duty Ignition - With No Primary Control

SAFETY AND

LIMIT CONTROLS

50A	30A
FUSE	FUSE

ORANGE

MOTOR

OPERATING

CONTROLS

10A FUSE

BLUE WITH	SOLID	VIOLET(+)
WHITE STRIPE	WHITE

YELLOW

CAPPEDIGNITER VALVE

(NOT USED)

BLACK BLACK WHITE(-)

GND

FROM 12 - 13.5 Vdc

POWER SUPPLY

Notes:

1.Wires are to be sized to prevent a voltage drop between battery and burner with burner running at full load.

2.Motor runs continuously in normal confi guration.

3.Hard-wire burner ground to battery. DO NOT USE CHASSIS GROUND SYSTEM.

SK10087

Figure 6B. Typical Wiring For Interrupted Ignition - With No Primary Control

SAFETY AND

LIMIT CONTROLS

50A	30A
FUSE	FUSE

OPERATING CONTROLS

10A FUSE

ORANGE	VIOLET(+)	SOLID	BLUE W/
		WHITE	WHITE STRIPE

MOTOR	VALVE	IGNITER	YELLOW	CAD
				CELL
			YELLOW

BLACK WHITE(-)

BLACK

GND

FROM 12 - 13.5 Vdc

POWER SUPPLY

Notes:

1.Wires aret to be sized to prevent a voltage drop between battery and burner with burner running at full load.

2.Hard-wire burner ground to battery. DO NOT USE CHASSIS GROUND SYSTEM.

SK10088

8