Display

In addition to being a practical tool to programme your appliance (see page 9), the display provides useful	G B

information concerning the wash cycle and status.
Once you have pressed the START/RESET button to
start the programme, the display will indicate the
amount of time left until the end of the wash cycle.
If a delayed start has been set (using the Delay
Timer, see page 9), the delay time will be indicated on
the display.
The following information is displayed during the
wash cycle:
Cycle phase under way:
Pre-wash
Wash cycle
Rinse
Spin cycle
Customised functions and options:
To select functions and options, see below and on
page 9.
Buzzer:
Your washing machine comes with a buzzer, which will
inform you of the various functions being carried
out, or of any malfunctions: incompatibility, option/
programme keys, start, end of cycle, reset.
Child lock:
For your safety and that of your children, you can block all the keys during the machine's operation or
during waiting position (delayed start - Stand-by) by pressing the function key for 2 seconds.
To disable this function, hold the same button down for 4 seconds.
Door lock:
If the symbol is on, the washing machine door is locked to prevent it from being opened accidentally. To
avoid any damages, wait for the symbol to switch itself off before you open the appliance door.
This model is fitted with a device that allows you to open the appliance door during some of the programme
phases. This is possible when the symbol is not on.
At the end of the programme, the word END is displayed.
In the event of an anomaly, an error code will appear, such as: F-01, (see page 13).