Hotpoint Ultima LCD manual Description

Page 2

Description

GB

Dispenser drawer

Control panel

 

(Varies by Model)

 

 

Please record the Model number and

Serial number of your machine on the back cover of this book for future reference.

- The Serial number can be found on the inside door trim.

Interlocking door and release lever.

Cold water inlet point and attached fill hose

(blue connector)

Drainage hose

Mains cable

Front adjustable feet

Hooked end support

Plumbing indicator line

TWO transit fixings. Comprising of: two bolts, two washers, two rubber grommets and two nylon spacers

!BOTH transit fixings must be removed BEFORE you use your machine (see page 5).

Rating plate

Back feet

2

Image 2
Contents Instructions for Installation and Use Description Contents Unpacking InstallationImportant check when unpacking your machine Remove the transit fixings LocationBenefits of cold fill LevellingWater Connection Electrical connections Before you start using your machineDrainage Connection Ultima Control Panel FeaturesUltima control panel features Starting a typical wash programme ‘Door Locked’ indicator, will light upStarting a Programme = 7kg Programme TableHow much does your laundry weigh? Option Modifiers Special Features Special featuresOption Modifiers Option modifiersAutomatic features Energy saving and water levelsWashcare Tips Detergents and LaundryDetergent dispenser Cleaning the dispenser drawer and compartments Care and maintenanceCleaning Moulded plugSaving energy and respecting the environment Precautions and adviceGeneral safety Recycling and Disposal informationSafety advice Technical Details ChartPossible causes / Solution Something Wrong? TroubleshootingProblem Error message ContentsSpare Parts ServiceBefore calling the Service Centre