Indesit WML 560 manual Indicator lights, Starting a wash cycle, Wash cycle phase indicator lights

Page 7

Indicator lights

The indicator lights provide important information. This is what they can tell you:

Wash cycle phase indicator lights

Once the desired wash cycle has been selected and has begun, the indicator lights switch on one by one to indicate which phase of the cycle is currently in progress.

Wash

Rinse

Spin

Pump out

End of wash cycle

Function buttons and corresponding indicator lights When a function is selected, the corresponding indicator light will illuminate.

If the selected function is not compatible with the pro- grammed wash cycle, the corresponding indicator light will flash and the function will not be activated.

If a function which is incompatible with another function selected previously, only the most recent selection will remain active.

Door locked indicator light

 

GB

If this indicator light is on, the appliance door is locked to

 

prevent it from being opened accidentally; to avoid any

 

 

damage, wait for the indicator light to switch off before you

 

open the appliance door.

 

!If the START/PAUSE indicator light (orange) flashes rapidly at the same time as the function indicator light, this indicates a problem has occurred (see “Troublesho- oting”).

Starting a wash cycle

1.Switch the washing machine on by pressing the ON/OFF button. All the indicator lights will turn on for a few seconds, then only the indicator lights relative to the selected programme settings will remain lit and the START/PAUSE indica- tor light will flash.

2.Load the laundry and close the door.

3.Set the WASH CYCLE knob to the desired programme.

4.Set the washing temperature (see “Personalisation”).

5.Set the spin speed (see “Personalisation”).

6.Measure out the detergent and washing additives (see “Detergents and laundry”).

7.Select the desired functions.

8.Start the wash cycle by pressing the START/PAUSE button and the corresponding indicator light will remain lit in a fixed manner, in green.

To cancel the set wash cycle, pause the machine by pressing the START/PAUSE button and select a new cycle.

9.At the end of the wash cycle the indicator light will switch on. The DOOR LOCKED indicator light will switch off, indicating that the door may be opened. Take out your laundry and leave the appliance door ajar to make sure the drum dries completely. Switch the washing machine off by pressing the ON/OFF button.

7

Image 7
Contents Washing Machine Instructions for useUnpacking and levelling InstallationElectric and water connections Green & Yellow Earth Blue 65 100 cmBrown Live Blue Neutral N Brown Live L Green & Yellow Earth E First wash cycleTechnical data Detergent dispenser drawer Wash Cycle Progress indicatorStandby mode ON/OFF buttonStarting a wash cycle Indicator lightsWash cycle phase indicator lights Door locked indicator lightTable of wash cycles Wash cyclesEco Wash cycles Functions Setting the temperatureSetting the spin speed PersonalisationPreparing the laundry Detergents and laundryDetergent dispenser drawer Garments requiring special careDisposal Precautions and tipsGeneral safety Opening the porthole door manuallyCare and maintenance Machine does not switch on Wash cycle does not start TroubleshootingProblem Possible causes / SolutionsGeneral Assistance GuaranteeRepublic of Ireland 0818 313 Hotpoint ServiceModel number Serial number Parts and Accessories Us the manufacturer