Installation, Unpacking and levelling | Hotpoint aqm8l 29 l specification

Installation

This instruction manual should be kept in a safe place

EN	for future reference. If the washer dryer is sold, given
	for future reference. If the washer dryer is sold, given
	away or moved, please ensure the manual is kept with
	the machine, so that the new owner may benefit from
	the advice contained within it.
	Read these instructions carefully: they contain vital
	information relating to the safe installation and operation
	of the appliance.
	Inside the pack containing this manual, you will also
	find the guarantee and all the details necessary for
	installation.
	Unpacking and levelling

Unpacking

1.Once you have removed all the packaging from the washer dryer, make sure it has not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed any further with the installation process.

2. Remove the 4 protective screws (used during transportation) and the corresponding spacer, located on the rear part of the appliance (see figure).

3.Close off the holes using the plastic plugs supplied in the pack.

4.Keep all the parts in a safe place; they will be needed again if the washer dryer is moved to another location, to prevent the inside of the appliance being damaged.

Packaging materials should not be used as toys for children.

Levelling

1.Place the washer dryer on a flat sturdy floor, without resting it up against walls or cabinets.

2. If the floor is uneven, the front feet of the machine may be adjusted until it reaches a horizontal position (the angle of inclination must not exceed 2 degrees).

If the appliance is levelled correctly, it will be more stable and much less likely to cause vibrations and noise while it is operating, particularly during the spin cycle.

If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washer dryer.

Connecting the electricity and water supplies

Connecting the water inlet hose

Before connecting the inlet hose to the water supply, run the water until it is perfectly clear.

1. Connect the inlet hose to the machine by screwing it onto the cold water inlet of the appliance, which is situated on the top right- hand side of the rear part of the appliance (see figure).

2. Connect the inlet hose by screwing it to a cold water tab using a 3/4 gas threaded connection (see figure).

3. Make sure that the hose is not folded over or bent.

The water pressure at the tap must fall within the values indicated in the Technical data table (see next page).

If the inlet hose is not long enough, contact a specialised shop or an authorised technician.

Never use second-hand or old inlet hoses; use the products supplied with the machine.

aqm8l 29 l specifications

The Hotpoint AQM8L 29 L is a top-tier washing machine that embodies innovation, efficiency, and user-friendliness. As part of Hotpoint's robust lineup of home appliances, this model is designed to cater to modern laundry needs while delivering superior performance.

One of the standout features of the AQM8L 29 L is its impressive capacity. With a drum size of 9 kg, this machine can easily handle large loads, making it ideal for families or households with significant laundry demands. This capacity not only saves time by allowing you to wash more clothes in one go but also optimizes water and energy usage, contributing to environmental sustainability.

The AQM8L 29 L is equipped with a range of innovative technologies that enhance its performance. The washing machine uses the Intelligent Anti-Stain system, which automatically detects and eliminates tough stains. This feature ensures that your clothes maintain their vibrancy and cleanliness without the need for additional pre-treatment.

Another notable technology in this model is the Eco-Logic system, which adjusts the water and energy consumption based on the load size. This intelligent feature not only reduces resource waste but also lowers your utility bills, making it an economical choice for everyday use.

Moreover, the AQM8L 29 L offers a variety of washing programs tailored to suit different fabric types and levels of soiling. The quick wash option, for instance, allows you to wash small, lightly soiled items in just 30 minutes, providing great convenience for those on the go. Other specialized programs include settings for delicates, wool, and sportswear, ensuring that every garment receives the appropriate care.

The machine also includes a delay start feature, which allows you to set the washing cycle to begin at a time that suits you. This flexibility can help align laundry with your schedule, making it easier to manage your daily tasks.

In terms of user interface, the AQM8L 29 L features a modern, intuitive control panel that simplifies operation. Its clear display and straightforward controls make it easy to select the desired cycle and settings.

Additionally, Hotpoint prioritizes safety with features like Child Lock, which prevents accidental operation by little hands. The machine's spin performance is impressive, contributing to reduced drying times and ensuring that clothes come out less damp.

In conclusion, the Hotpoint AQM8L 29 L is a versatile, efficient, and user-friendly washing machine that meets the demands of contemporary households. With its smart technologies, ample capacity, and various washing options, it promises to be a reliable companion in tackling your laundry needs.