Troubleshooting

From time to time your machine may not operate as it should. Before calling for Assistance (see “Assistance”),

make sure that the problem cannot be resolved easily using the following list.				GB

Malfunction:		Possible causes / Solutions:
The	washing machine	•	The plug has not been inserted into the electrical socket, or it has not
will	not switch on.		been inserted far enough to make contact.
		•	There is no power in the house.
The	wash cycle	•	The porthole door has not been shut properly.
does not begin.		•	The START/PAUSE button has not been pressed.
		•	The water tap has not been turned on.

The washing machines fails to fill with water.

•The water inlet hose is not connected to the tap.

•The hose is kinked.

•The water tap has not been turned on.

•There is no water in the house.

•The water pressure is insufficient.

•The START/PAUSE button has not been pressed.

The machine continuously fills and drains water.

•The end of the outlet hose has not been fitted at a height between 65 and 100 cm from the floor (see “Installation”).

•The free end of the hose is underwater (see “Installation”).

•If If the dwelling is on one of the upper floors of a building, there may be problems relating to water drainage, causing the washing machine to load and drain water continuously. Special anti-draining valves are available in shops and help to avoid this inconvenience.

•The water drainage systemis not fitted with a breather pipe.

The machine does not drain or spin.

•The programme does not include a draining phase: some programmes require manual draining (see “Programmes and options”).

•The “Reduced Creases” option is enabled: to complete the programme, press the START/PAUSE button (see “Programmes and options”).

•The outlet hose is bent (see “Installation”).

•The drainage duct is clogged.

The washing machine vibrates too much during the spin cycle.

•The drum was not unlocked properly when the appliance was installed (see “Installation”).

•The washing machine is not level (see “Installation”).

•The washing machine is trapped between cabinets and a wall (see “Installation”).

•The load is not balanced properly (see “Description of the machine”).

The washing machine leaks.	•	The water inlet hose is not screwed on to the tap correctly (see “Installation”).
	•	The detergent dispenser drawer is blocked (for instructions on how to
		clean it, see “Care and maintenance”).
	•	The outlet hose has not been secured properly (see “Installation”).

The icons corresponding to the “Phase in progress” flash rapidly at the same time as the ON/OFF indicator light.

There is too much foam.

The washing machine door remains locked.

•Switch off the machine and unplug the appliance; wait for approximately 1 minute then switch it on again.

If the problem persists, contact Assistance.

•The detergent is not designed for machine washing (the packaging should state that the product is “for washing by machine”, “for washing by hand or machine” or similar).

•Too much detergent was used.

•Follow the manual unlocking procedure (see “Precautions and tips”).

If the problem persists after the above checks have been carried out, shut off the water tap, switch off the machine and contact Assistance.

1 3

AQXXF 149 PM specifications

The Hotpoint AQXXF 149 PM is a commendable washing machine that perfectly blends functionality and innovation, making it a popular choice for households seeking efficiency and performance. This model is part of Hotpoint's dedicated line of appliances known for their reliability and user-friendly features.

One of the standout features of the AQXXF 149 PM is its impressive capacity of 9 kg, which allows users to wash larger loads in a single cycle. This is particularly beneficial for families or individuals with a significant amount of laundry, ensuring that laundry days are finished quickly. Coupled with a spin speed of 1400 RPM, the washing machine successfully extracts excess water, reducing drying time and enhancing overall efficiency.

In terms of energy efficiency, the AQXXF 149 PM boasts an energy rating of A+++, underscoring its eco-friendly design. This not only translates to lower utility bills but also represents a commitment to sustainability, an increasingly important factor for modern consumers.

Hotpoint has equipped the AQXXF 149 PM with smart technologies that further improve the user experience. The Anti-Stain technology is one such feature, designed to tackle a variety of stains effectively without the need for pre-treatment. It automatically adjusts water temperature and motion patterns to ensure that even the toughest stains are removed, providing peace of mind for busy parents or individuals.

Another notable technology is the ActiveCare function, which ensures that the garments receive a gentle yet thorough wash. This feature minimizes fabric wear, extending the life of clothing while maintaining their color and texture. The Quick Wash option is yet another advantage, allowing users to complete a cycle in as little as 30 minutes, perfect for those last-minute laundry needs.

The machine is equipped with intuitive controls and a digital display that simplifies the selection of wash programs. It features several preset wash options catering to various fabric types, including delicate, wool, and synthetics, ensuring that every item is treated appropriately.

In addition, the AQXXF 149 PM has a delay start feature, which can be particularly convenient for users who want to take advantage of off-peak energy rates or those who prefer to run their laundry at night.

Overall, the Hotpoint AQXXF 149 PM stands out as a modern, efficient washing machine that offers an array of beneficial features aimed at simplifying laundry tasks while delivering excellent cleaning results. Its thoughtful design and advanced technologies make it a reliable companion for any household.

Troubleshooting

Malfunction:

Possible causes / Solutions:

AQXXF 149 PM specifications