Lint screen
Clean the lint screen before each load. A screen blocked by lint can increase drying time and may be a FIRE HAZARD. ,~~~.
Open the lid and pull the lint screen straight out.
ROLL the lint off the screen with your fingers.
DO NOT rinse or wash the screen
Push the screen firmly back into place.
Lint removal
Lint can gather inside the dryer and create a fire hazard. This lint
should be removed every 2 to 3 years, or more otten, depending on dryer usage.
ELECTRIC DRYERS | GAS DRYERS |
Cleaning should be done
WARNING:
l Avoid electrical shock hazard - unplug power
asupply cord or turn off
electrical power.
l Avoid injury or
l Make sure dryer is cool,
only by a qualified person.
1.Remove back panel (electric] or lower access panel (gas).
2.Avoid damaging wires, thermostats, funnel or igniter.
3.Remove lint from shaded area - see art- with a soft brush or vacuum cleaner.
4.Replace panel; reconnect and