Whirlpool W10097053B Select the desired cycle Select cycle options if desired, Set cycle settings

4. Select the desired cycle 6. Select cycle options (if desired)

Select the desired cycle for your load. See the “Cycle Guide” or the display for more information about each cycle.

NOTE: Not all options and settings are available with all cycles.

5. Set cycle settings

Add additional options by pressing the button.

NOTE: Not all options and settings are available with all cycles.

7. Press START/PAUSE to begin cycle

Press the START/PAUSE button to begin the cycle.

8. Remove garments promptly after cycle is finished

The default cycle settings will be shown. For some cycles, you may select alternate settings by pressing the button for that setting. Time adjusts for Manual Cycles only.

NOTE: Not all options and settings are available with all cycles.

Temp (for use with Manual Cycles only)

Press the TEMP button to change the drying temperature from the default setting. Press MORE TIME or LESS TIME and the time will change by 1-minute intervals. Press and hold MORE TIME or LESS TIME and the time will change by 5-minute intervals.

Dryness Level (for use with Automatic Cycles only)

You can select a different dryness level, depending on your load, by pressing the button for More, Normal, or Less. Selecting More, Normal, or Less automatically adjusts the dryness level at which the dryer will shut off. Once a dryness level is set, it cannot be changed without stopping the cycle.

Automatic cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting.

NOTE: More Dry removes more load moisture. Normal Dry is used for a starting point for automatic drying. Less Dry removes less moisture and is used for loads you may want to put on a hanger to complete drying.

Wrinkle Shield™ feature

nGet up to 60/150 minutes of heat-free, periodic tumbling at the end of a cycle. Press the WRINKLE SHIELD™ button to turn ON or OFF at any time before the cycle has ended.

nThe WRINKLE SHIELD™ feature is preset to “OFF.” If selected for other cycles, the WRINKLE SHIELD™ feature

8setting will remain “ON” the next time that cycle is selected.

Promptly remove garments after cycle has completed to reduce wrinkling. If you are unable to remove the load promptly, press the Wrinkle Shield button to turn ON or OFF at any time before the cycle has ended.

9. Additional features (on some models)

Select Drum Light to turn on the light inside the dryer drum. When pressed during a cycle or not running, the Drum Light turns on and will remain on until DRUM LIGHT is pressed again, the door is opened and closed, or the door is left open for 30 minutes.