JVC XV-THS77, SP-PWS77, SP-THS77C Resume playback, Selecting the subtitle, Selecting a view angle

Advanced operations

See page 22 for button locations.

Resume playback

When Resume Playback is set to “ON” (A pg. 36) and you stop playback by the following operations, the position where playback has been stopped is stored. (“RESUME” appears on the display window.)

•Turning off the power (A pg. 14)

•Pressing 7 once

•Changing the source (A pg. 15)

DVD DVD DVD VIDEO AUDIO VR

Selecting the subtitle

When using the SUBTITLE button:

1 Press SUBTITLE.

Example (DVD VIDEO):

“ENGLISH” is selected out of 3 subtitle languages recorded.

To start playback from the stored position

Press 3 (play button) or DVD.

•There may be a case where 3 (play button) does not work after changing the source.

To clear the stored position

Press 7 again or open the disc tray.

Selecting a view angle

When using the ANGLE button:

1 Press ANGLE.

Example:

The first view angle is selected out of 3 view angles recorded.

2 Press ANGLE repeatedly or press Cursor Y/5 to select the desired view angle.

When using the on-screen bar:

1 Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

2 Press Cursor 3/2 to highlight . 3 Press ENTER.

Dolby D 2/0 . 0ch

4 Press Cursor Y/5 to select the desired view angle.

5 Press ENTER.

6 Press ON SCREEN.

The on-screen bar disappears.

NOTE

•During DVD AUDIO playback, this feature is available only for the video part.

2 Press Cursor Y/5 to select the desired subtitle.

For DVD VR

•Pressing SUBTITLE activates the subtitles (subpictures) regardless of whether the subtitles are recorded or not. (subpictures will not change if no subpictures is recorded.)

For SVCD

•An SVCD can contain up to four subtitles. Pressing SUBTITLE changes the subtitles regardless of whether the subtitles are recorded or not. (Subtitles will not change if no subtitle is recorded.)

NOTE

•To clear the subtitle, press SUBTITLE. Each time you press SUBTITLE, subtitle appears and disappears alternately.

When using the on-screen bar:

1 Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

2 Press Cursor 3/2 to highlight . 3 Press ENTER.

Dolby D 2/0 . 0ch

4 Press Cursor Y/5 repeatedly to select the desired subtitle.

5 Press ENTER.

6 Press ON SCREEN.

The on-screen bar disappears.

NOTE

•To clear the subtitle, press SUBTITLE. Each time you press SUBTITLE, subtitle appears and disappears alternately.

•Some subtitle or audio languages are abbreviated in the pop-up window. See “The language codes list” (A pg. 34).

•During DVD AUDIO playback, this feature is available only for the video part.